Chiral nitrogen ligands

Tris[2-(dimethylamino)ethyl]amine, cas is 33527-91-2, it is a common heterocyclic compound, the chiral-nitrogen-ligands compound, its synthesis route is as follows.,33527-91-2

General procedure: The copper complex Cu5-1 was dissolved in water, and an excessive amount of an aqueous solution of saturated sodium tetrafluoroborate (manufactured by Wako Pure Chemical Industries, Ltd.) was added while stirring. A precipitated solid was collected by filtering and a copper complex Cu5-72 was obtained.

As the rapid development of chemical substances, we look forward to future research findings about 33527-91-2

Reference£º
Patent; FUJIFILM Corporation; Sasaki, Kouitsu; Kawashima, Takashi; Hitomi, Seiichi; Shiraishi, Yasuharu; US10215898; (2019); B2;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.110-70-3,N1,N2-Dimethylethane-1,2-diamine,as a common compound, the synthetic route is as follows.,110-70-3

N, N’-Dimethylethylenediamine (5.00g, 57mmol) was dissolved in CH2Cl2 (25mL) and cooled to 0C. Di-tert-butyl dicarbonate (5.00g, 22mmol) was dissolved in CH2Cl2 (25mL) and added dropwise to the reaction flask at 0C, and then warmed to room temperature and stirred overnight. The reaction solution was quenched with H2O (20mL), and extracted with CH2Cl2 (40mL x 2), and the combined organic layers dried with Na2SO4, filtered and concentrated. The residue was purified by column chromatography on silica gel using CH3OH/CH2Cl2 (1/20, V/V) as eluent to give 2 as colorless oil (4.37g, 81%), 1H NMR (400MHz, CDCl3) delta 3.39-3.36 (m, 2H, CH2), 2.95-2.90 (s, 3H, CH3), 2.76 (m, 2H, CH2), 2.48 (s, 3H, CH3), 1.48 (s, 9H, (CH3)3); HRMS (ESI) m/z [M+H]+ Calcd for C9H21N2O2+: 189.1603. Found: 189.1601.

The synthetic route of 110-70-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Yang, Hao; Ouyang, Yifan; Ma, Hao; Cong, Hui; Zhuang, Chunlin; Lok, Wun-Taai; Wang, Zhe; Zhu, Xuanli; Sun, Yutong; Hong, Wei; Wang, Hao; Bioorganic and Medicinal Chemistry Letters; vol. 27; 20; (2017); p. 4635 – 4642;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.33527-91-2,Tris[2-(dimethylamino)ethyl]amine,as a common compound, the synthetic route is as follows.,33527-91-2

General procedure: The copper complex Cu5-1 was dissolved in water, and an excessive amount of an aqueous solution of saturated sodium tetrafluoroborate (manufactured by Wako Pure Chemical Industries, Ltd.) was added while stirring. A precipitated solid was collected by filtering and a copper complex Cu5-72 was obtained.

As the paragraph descriping shows that 33527-91-2 is playing an increasingly important role.

Reference£º
Patent; FUJIFILM Corporation; Sasaki, Kouitsu; Kawashima, Takashi; Hitomi, Seiichi; Shiraishi, Yasuharu; US10215898; (2019); B2;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

110-70-3, N1,N2-Dimethylethane-1,2-diamine is a chiral-nitrogen-ligands compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,110-70-3

In a 1000 ml three-necked flask equipped with a dropping funnel and a magnetic stirrer, 31.9 g (0.233 mol) of phosphorus trichloride and 500 ml of anhydrous diethyl ether were charged at room temperature in a nitrogen gas atmosphere, and the mixture was cooled to 5C or less in an ice bath. While the resulting reaction mixture was stirred, 25.0 ml (0.233 mol) of N,N’-dimethylethylenediamine were slowly added dropwise to the reaction mixture. Furthermore, 65.0 ml (0.465 mol) of triethylamine were slowly added dropwise. After the reaction mixture was further stirred for 1.5 hours, it was filtered under pressure in a nitrogen gas atmosphere. After the resulting crystals were washed with anhydrous diethyl ether three times, they were purified by vacuum-distillation (0.4 kPa, 44-52C), and 16.28 g of chloro(N,N’-dimethylethylenediamino)phosphine were obtained in the form of a transparent liquid; the yield was 46%. The resulting compound was identified with a nuclear magnetic resonance analyzer (BRUKER Ultra Shield 300 NMR Spectrometer, manufactured by BRUKER Limited.). The resulting spectral data are shown below. 1H-NMR (300 MHz, solvent: CDCl3, standard substance: tetramethylsilane) delta 3.32 (d, 4H) 2.78 (d, 6H) 31P-NMR (121 MHz, solvent: CDCl3, standard substance: triphenylphosphine) delta 171.30 (s, 1P) The structural formula is shown below.

110-70-3 N1,N2-Dimethylethane-1,2-diamine 8070, achiral-nitrogen-ligands compound, is more and more widely used in various.

Reference£º
Patent; Kanto Denka Kogyo CO., LTD.; EP1956026; (2008); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

(R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, cas is 31886-58-5, it is a common heterocyclic compound, the chiral-nitrogen-ligands compound, its synthesis route is as follows.,31886-58-5

The compound having the structure shown in Formula (II) of FIG. 4 was made using the scheme set forth in FIG. 1. First, alpha-Dimethylaminoethylferrocene, (14.30 g, 55.61 mmol), (as Compound 1) was dissolved in solvent (85 ml) under argon. N-butyl lithium (1.6 M) was added slowly (22.6 ml, 66.73 mmol, 1.2 eq.) and the reaction was stirred at room temperature for one hour. The solution was then purged with argon for thirty minutes. Chlorodiphenylphosphine (12.0 ml, 66.73 mmol, 1.2 eq.) in tert-butyl methyl ether (10 ml) was added slowly, and the reaction stirred at room temperature for four hours. The reaction was cooled to 0 C., and saturated sodium bicarbonate solution (57 ml) was added followed by water (45 ml). The composition separated into aqueous and organic phases, and the aqueous layer was removed and washed with toluene, and the resulting toluene was separated from the aqueous layer and combined with the organic layer, with the resulting composition being was dried over magnesium sulfate. The magnesium sulfate hydrate was then removed by filtration. The resulting filtrate solution was concentrated under vacuum to give an orange oil. The resulting oil was dissolved in ethanol and then solvents were removed under vacuum once more. The oil was then recrystallized by dissolving in the minimum amount of hot ethanol (45 ml) and cooling to room temperature. The resulting product, present as an orange solid, contained compound 2, which was 1-alpha-dimethyl-aminoethyl-2-(diphenylphosphino)ferrocene (9.16 g, 20.7 mmol, 31% yield).

As the rapid development of chemical substances, we look forward to future research findings about 31886-58-5

Reference£º
Patent; Eastman Chemical Company; How, Rebecca; Clarke, Matt; Hembre, Robert Thomas; Ponasik, James A.; Tolleson, Ginette S.; (17 pag.)US9308527; (2016); B2;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

Tris[2-(dimethylamino)ethyl]amine, cas is 33527-91-2, it is a common heterocyclic compound, the chiral-nitrogen-ligands compound, its synthesis route is as follows.,33527-91-2

To a solution of tris(2-dimethylaminoethyl)amine (0.436 g, 1.89 mmol) in acetonitrile (4 mL) was added 1-bromooctane (1.20 g, 6.22 mmol). The resulting mixture was heated at reflux with stirring for 18 hours, during which time a white solid was observed. After cooling, and the addition of a cold hexanes/acetone mixture (15 mL, 1:1), to the reaction flask, the precipitate was filtered with aBuchner funnel, and rinsed with a cold hexanes/acetone mixture (20 mL, 1:1), resulting in T-8,8,8 (1.45 g, 95%) as a yellow-white wax; ?H NMR (300 MI-Tz, CDC13) oe 4.02-3.94 (m, 6H), 3.63-3.54 (m, 6H), 3.42-3.30 (m, 24H), 1.79-1.67 (m, 6H), 1.41-1.19 (m, 30H), 0.90-0.83 (m, 9H); ?3C NMR (75 MHz, CD3OD) oe 65.3,61.0, 50.1, 46.8, 31.5, 28.9, 26.1, 22.4, 22.3, 13.1; high resolution mass spectrum(ESI) m/z 189.8823 ([Mj3 calculated for [C36H8,N4j3: 189.8815). See also Yoshimura et al., 2012, Langmuir 28:9322-933 1. ?H and ?3C NMR spectra of compound T-8,8,8 can be found in Figure 49.

As the rapid development of chemical substances, we look forward to future research findings about 33527-91-2

Reference£º
Patent; TEMPLE UNIVERSITY-OF THE COMMONWEALTH SYSTEM OF HIGHER EDUCATION; VILLANOVA UNIVERSITY; WUEST, William, M.; MINBIOLE, Kevin, P.C.; BARBAY, Deanna, L.; (227 pag.)WO2016/172436; (2016); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

A common heterocyclic compound, the chiral-nitrogen-ligands compound, name is (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine,cas is 31886-58-5, mainly used in chemical industry, its synthesis route is as follows.,31886-58-5

Preparation of A1 (mixture of diastereomers)15.5 ml (23.2 mmol) of t-BuLi (1.5 M in pentane) are added dropwise to a solution of 5.98 g (23.2 mmol) of (R)-1-dimethylamino-1-ferrocenylethane in 40 ml of diethyl ether (DE) at <-10C. After stirring the mixture at the same temperature for 10 minutes, the temperature is allowed to rise to room temperature and the mixture is stirred for another 1.5 hours. This gives a solution of the compound X2 which is added via a cannula to a cooled suspension of the monochlorophosphine X1 at such a rate that the temperature does not exceed -30C. After stirring the mixture at -30C for a further 10 minutes, the temperature is allowed to rise to 0C and the mixture is stirred for another 2 hours. The reaction mixture is admixed with 20 ml of water. The organic phase is separated off, dried over sodium sulphate and the solvent is distilled off under reduced pressure on a rotary evaporator. Chromatographic purification (silica gel 60; eluent = heptane/ethyl acetate(EA)/NEthyl3(Net3) 85:10:5) gives 1 1.39 g of the desired product as a mixture of 2 diastereomers. As the rapid development of chemical substances, we look forward to future research findings about 31886-58-5 Reference£º
Patent; SOLVIAS AG; WO2007/116081; (2007); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.110-70-3,N1,N2-Dimethylethane-1,2-diamine,as a common compound, the synthetic route is as follows.,110-70-3

The ligand L1Q was synthesized via similar procedure mentionedabove [23]. To an aqueous solution of 2-(chloromethyl)-quinoline hydrochloride (2 g, 9.34 mmol), a solution of potassiumcarbonate (2.73 g, 18.66 mmol) in 10 mL water was added in dropwisemanner. The reaction mixture was stirred for 30 min at ambienttemperature. After stirring, the resulting solution wasextracted with dichloromethane (3 20 mL). The combinedorganic extracts were dried over anhydrous sodium sulfate andsolvent was evaporates under vacuum. The product 2-(chloromethyl)-quinoline was then dissolved in dichloromethane(10 mL) and was added dropwise to a solution of N,N0-dimethylethylenediamine (0.503 mL, 5.34 mmol) in 15 mL dichloromethane.After this addition, aqueous sodium hydroxide (10 mL,1 M) was added slowly. The reaction mixture was stirred for next60 h at room temperature, followed by rapid addition of anotherfraction of sodium hydroxide (10 mL, 10 mmol). The reaction mixturewas then extracted with dichloromethane (3 25 mL) andorganic portions were combined and dried over anhydrous sodiumsulfate. Volatile solvents were removed under vacuum to obtaincrude ligand L1Q as dark brown oil (1.68 g, Yield 85%). 1H NMR(500 MHz, Methanol-d4) d 7.57 (m, 2H, quinoline ring),7.63 (d,2H, quinoline ring), 7.73 (m, 2H, quinoline ring), 7.88 (d, 2H, quinolinering),7.98 (d, 2H, quinoline ring), 8.21 (d, 2H, quinoline ring),3.84 (s, 4H, -N-CH2-Quinoline), 2.71 (s, 4H, -CH2-CH2-), 2.32 (s,6H, -N-CH3). IR (cm1): 3384, 3056, 2946, 2800, 1617, 1598,1564, 1504, 1456, 1426, 1361, 1309, 1223, 1141, 1119, 1032,985, 951, 828, 784, 756, 619.

The synthetic route of 110-70-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Singh, Nirupama; Niklas, Jens; Poluektov, Oleg; Van Heuvelen, Katherine M.; Mukherjee, Anusree; Inorganica Chimica Acta; vol. 455; (2017); p. 221 – 230;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

110-70-3, N1,N2-Dimethylethane-1,2-diamine is a chiral-nitrogen-ligands compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,110-70-3

A mixture of 2-(3-bromo-phenyl)-3,3-dimethyl-1,2,3,4-tetrahydro-quinoline-6-carboxylic acid (600 mg, 1.7 mmol), N,N’-dimethyl-ethane-1,2-diamine (0.37 mL, 3.4 mmol), copper(I) iodide (96 mg, 0.5 mmol), N,N-dimethylglycine hydrochloride (140 mg, 1.0 mmol) and potassium carbonate (923 mg, 6.7 mmol) in dimethyl sulfoxide (5 mL) was stirred at 120 C. for 16 h. Then the reaction mixture cooled to room temperature. The reaction mixture was extracted with ethyl acetate (2¡Á150 mL), washed with water (2¡Á50 mL) and saturated aqueous ammonium chloride solution (2¡Á50 mL), dried over anhydrous sodium sulfate and then concentrated in vacuo. Purification by Waters automated flash system (column: Xterra 30 mm¡Á100 mm, sample manager 2767, pump 2525, detector: ZQ mass and UV 2487, solvent system: acetonitrile and 0.1% ammonium hydroxide in water) afforded 3,3-dimethyl-2-{3-[methyl-(2-methylamino-ethyl)-amino]-phenyl}-1,2,3,4-tetrahydro-quinoline-6-carboxylic acid (500 mg, 80%) as a white solid: LC/MS m/e calcd for C22H29N3O2 (M+H)+: 368.50, observed: 368.1.

The synthetic route of 110-70-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Chen, Li; Feng, Lichun; Huang, Mengwei; Liu, Yongfu; Wu, Guolong; Wu, Jim Zhen; Zhou, Mingwei; US2011/257151; (2011); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

A common heterocyclic compound, the chiral-nitrogen-ligands compound, name is Tris[2-(dimethylamino)ethyl]amine,cas is 33527-91-2, mainly used in chemical industry, its synthesis route is as follows.,33527-91-2

Mixturing of Co(CH3COO)24H2O (57 mg, 0,23 mmol) and Me6TREN (in excess) was followed by sonication until all the pink cobalt salt was transformed into a bright green oil. The excess of ligand was washed away with diethyl ether.

As the rapid development of chemical substances, we look forward to future research findings about 33527-91-2

Reference£º
Article; Tordin, Elisa; List, Manuela; Monkowius, Uwe; Schindler, Siegfried; Knoer, Guenther; Inorganica Chimica Acta; vol. 402; (2013); p. 90 – 96;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis