Chiral nitrogen ligands

Name is (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, as a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, and cas is 31886-58-5, its synthesis route is as follows.,31886-58-5

General procedure: To a solution of (R)-Ugi?s amine 3 (2.57 g, 10 mmol) in TBME (20 mL) was added 1.6 M t-BuLi solution in n-hexane (6.8 mL, 10.88 mmol) at 0 C. After the addition was complete, the mixture was warmed to room temperature, and stirred for 1.5 h at room temperature. The mixture was then cooled to 0 C again, and Ar2PCl (11 mmol) was added in one portion. After stirring for 20 min at 0 C, the mixture was warmed to room temperature, and stirred for 1.5 h at room temperature. The mixture was then quenched by the addition of saturated NaHCO3 solution (20 mL). The organic layer was separated and dried over MgSO4, and the solvent was removed under reduced pressure, after which the filtrate was concentrated. The residue was purified by chromatography to afford 4a, 4e, and 4f.

With the complex challenges of chemical substances, we look forward to future research findings about (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine

Reference£º
Article; Nie, Huifang; Zhou, Gang; Wang, Quanjun; Chen, Weiping; Zhang, Shengyong; Tetrahedron Asymmetry; vol. 24; 24; (2013); p. 1567 – 1571;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

It is a common heterocyclic compound, the chiral-nitrogen-ligands compound, N1,N2-Dimethylethane-1,2-diamine, cas is 110-70-3 its synthesis route is as follows.,110-70-3

The mixture of N, N’-Dimethylene diamine 21-1 (5 mL, 46.5 mmol) and tert-butyl acrylate 13 mL (116 mmol) was heated at 85 C for 1 hour. Another 13 mL (116 mmol) of tert- butyl acrylate was added. The reaction mixture was continuely heated at 85C for 1 hour and stirred at room temperature overnight. The reaction mixture was concentrated in vacuo. The residue wasdiluted with hexanes and purified by flash column chromatography using SiliaSep Cartridges (120g), eluting with 0-5% methanol/DCM to give 10.1 g (62%) of compound 21-2. MS (ESI) m/z 345 [M+H].

With the complex challenges of chemical substances, we look forward to future research findings about N1,N2-Dimethylethane-1,2-diamine

Reference£º
Patent; AMBRX, INC.; MIAO, Zhenwei; ATKINSON, Kyle, C.; BIROC, Sandra; BUSS, Timothy; COOK, Melissa; KRAYNOV, Vadim; MARSDEN, Robin; PINKSTAFF, Jason; SKIDMORE, Lillian; SUN, Ying; SZYDLIK, Angieszka; VALENTA, Ianina; WO2012/166560; (2012); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

Name is (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, as a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, and cas is 31886-58-5, its synthesis route is as follows.,31886-58-5

To a degassed solution of (R)-1 (662 mg, 2.57 mmol) in THF (3.2 mL) was added sec-BuLi (1.4 M in cyclohexane, 2 mL, 2.8 mmol) at 0 C. The resulting deep-red solution was stirred for an additional 3 h at the same temperature. To this reaction mixture was added a solution of ZnBr2 (1.3 M in THF, 2.38 mL, 3.09 mmol) at 0 C and stirring was continued at r.t. for 1 h. To a degassed solution of [Pd2dba3]¡¤CHCl3 (266 mg, 0.257 mmol) and tris(2,4-di-tert-butylphenyl)-phosphite (666 mg, 1.029 mmol) in THF (5.5 mL) was added a degassed solution of sulfide (S)- 4 (890 mg, 2.05 mmol) in THF (3 mL). The resulting dark purple solution was stirred for an additional 10 min at r.t. and was subsequently added dropwise to the previously prepared organozinc compound. The reaction mixture was heated to reflux under argon at 75 C for 18 h, and then cooled to r.t., quenched with H2O and extracted with ethyl acetate (3 ¡Á 200 mL). The combined organic layers were washed with brine (3 ¡Á 200 mL) and dried over MgSO4. The mixture was filtered, the solvent was evaporated and the crude product was purified by column chromatography (silica, PE/EE/NEt3 = 20/10/1). The product (R,SFc,RFc)- 5 was obtained as an orange foam (yield: 687 mg, 59%). M.p.: 58-61 C. 1H NMR (400 MHz, CDCl3): delta 1.37 (d, J = 6.8 Hz, 3H, CH3CH), 1.61 (s, 6H, N(CH3)2), 2.20 (s, 3H, Ph-CH3), 3.65 (q, J = 6.8 Hz, 1H, CH3CH), 4.11 (dd, J1 = 2.4 Hz, J2 = 1.4 Hz, 1H, H3), 4.27 (s, 5H, Cp?), 4.30 (dd, J1 = J2 = 2.4 Hz, 1H, H4), 4.35 (s, 5H, Cp?), 4.37 (dd, J1 = J2 = 2.5 Hz, 1H, H4?) 4.44 (dd, J1 = 2.5 Hz, J2 = 1.5 Hz, 1H, H3? 4.59 (dd, J1 = 2.5 Hz, J2 = 1.5 Hz, 1H, H5? 4.64 (dd, J1 = 2.4 Hz, J2 = 1.4 Hz, 1H, H5), 6.88 (d, J = 8.1 Hz, 2H, Ph-meta), 7.02 (d, J = 8.1 Hz, 2H, Ph-ortho). 13C{1H} NMR (100.6 MHz, CDCl3): delta 14.7 (CH3CH), 20.9 (Ph-CH3), 40.3 (2C, N(CH3)2), 55.4 (CH3CH), 66.1 (C4), 66.7 (C3), 67.9 (C4? 69.6 (5C, Cp’), 70.7 (5C, Cp?), 71.7 (C5? 72.4 (C5), 74.1 (C3? 89.8 (C2), 128.9 (2C, Ph-ortho), 129.1 (2C, Ph-meta), 135.1 (2C, Ph-ipso + Ph-para); 3 Cq (C1, C1? C2? were not observed. HR-MS (EI): m/z [M?]+ calcd. 563.1032 for C31H33Fe2NS; found: 563.1050. [alpha]lambda20 (nm): -660 (589), -746 (578), -1180 (546) (c 0.224, CHCl3).

With the complex challenges of chemical substances, we look forward to future research findings about (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine

Reference£º
Article; Gross, Manuela A.; Mereiter, Kurt; Wang, Yaping; Weissensteiner, Walter; Journal of Organometallic Chemistry; vol. 716; (2012); p. 32 – 38;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is N1,N2-Dimethylethane-1,2-diamine, and cas is 110-70-3, its synthesis route is as follows.,110-70-3

EXAMPLE 12 N-Boc-N,N’-dimethylethylene diamine N,N’-dimethyl ethylenediamine (8.8 g) was dissolved in 200 ml tetrahydrofuran and to this was added over a 10 min period di-t-butyldicarbonate (4.36 g) in 30 mL tetrahydrofuran. 72 hours later, the solvent was evaporated and the residue partitioned between ether and KHCO3 and the organic layer was dried (MgSO4) and evaporated to give 11.6 g title compound (58% yield). 300 MHz 1 H NMR was consistent with proposed structure.

110-70-3 is used more and more widely, we look forward to future research findings about N1,N2-Dimethylethane-1,2-diamine

Reference£º
Patent; G. D. Searle & Co.; US4902706; (1990); A;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

N1,N2-Dimethylethane-1,2-diamine, cas is 110-70-3, it is a common heterocyclic compound, the chiral-nitrogen-ligands compound, its synthesis route is as follows.,110-70-3

Example 1203 ,3 -Dimethyl-2-{3 – [methyl- (2-methylamino-ethyl) -amino] -phenyl}- 1 ,2,3 ,4- tetrahydro-quinoline-6-carboxylic acidA mixture of 2-(3-bromo-phenyl)-3,3-dimethyl-l,2,3,4-tetrahydro-quinoline-6-carboxylic acid (600 mg, 1.7 mmol), N,N’-dimethyl-ethane-l,2-diamine (0.37 mL, 3.4 mmol), copper(I) iodide (96 mg, 0.5 mmol), N, N-dimethylglycine hydrochloride (140 mg, 1.0 mmol) and potassium carbonate (923 mg, 6.7 mmol) in dimethyl sulfoxide (5 mL)was stirred at 120C for 16 h. Then the reaction mixture cooled to room temperature. The reaction mixture was extracted with ethyl acetate (2 x 150 mL), washed with water (2 x 50 mL) and saturated aqueous ammonium chloride solution (2 x 50 mL), dried over anhydrous sodium sulfate and then concentrated in vacuo. Purification by Waters automated flash system (column: Xterra 30 mm x 100 mm, sample manager 2767, pump 2525, detector: ZQ mass and UV 2487, solvent system: acetonitrile and 0.1% ammonium hydroxide in water) afforded 3,3-dimethyl-2-{3- [methyl-(2-methylamino-ethyl)-amino] – phenyl} -l,2,3,4-tetrahydro-quinoline-6-carboxylic acid (500 mg, 80%) as a white solid : LC/MS m/e calcd for C22H29N3O2 (M+H)+: 368.50, observed: 368.1.

With the rapid development of chemical substances, we look forward to future research findings about N1,N2-Dimethylethane-1,2-diamine

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; CHEN, Li; FENG, Lichun; HUANG, Mengwei; LIU, Yongfu; WU, Guolong; WU, Jim, Zhen; ZHOU, Mingwei; WO2011/128251; (2011); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

N1,N2-Dimethylethane-1,2-diamine, cas is 110-70-3, it is a common heterocyclic compound, the chiral-nitrogen-ligands compound, its synthesis route is as follows.,110-70-3

Example 20Preparation of (E)-methyl 4-(methyl(2-((4Z,7Z,10Z,13Z,16Z,19Z)-N-methyldocosa-4,7,10,13,16,19-hexaenamido)ethyl)amino)-4-oxobut-2-enoate (Compound I-104) tert-Butyl methyl(2-(methylamino)ethyl)carbamate was prepared as follows: N1,N2-dimethylethane-1,2-diamine (40 mmol) was dissolved in 100 mL of CH2Cl2 and cooled to 0 C. A solution of di-tert-butylcarbonate (4.0 mmol) in CH2Cl2 (10 mL) was then added dropwise at 0 C. over a period of 15 min. The resulting reaction mixture was stirred at 0 C. for 30 min and then warmed to room temperature. After stirring at room temperature for 2 h, the reaction mixture was diluted with CH2Cl2 (100 mL). The organic layer was washed with brine (3¡Á25 mL), dried (Na2SO4) and concentrated under reduced pressure to afford tert-butyl methyl(2-(methylamino)ethyl)carbamate. This amine was subjected to the same reaction conditions outlined earlier in the preparation of (E)-methyl 4-(2-(4Z,7Z,10Z,13Z,16Z,19Z)-docosa-4,7,10,13,16,19-hexaenamidoethylamino)-4-oxobut-2-enoate. The desired product, namely (E)-methyl 4-(methyl(2-((4Z,7Z,10Z,13Z,16Z,19Z)-N-methyldocosa-4,7,10,13,16,19-hexaenamido)ethyl)amino)-4-oxobut-2-enoate, was obtained after purification by silica gel chromatography. MS (EI) calcd for C31H46N2O4: 510.35. found 511 (M+1).

With the rapid development of chemical substances, we look forward to future research findings about N1,N2-Dimethylethane-1,2-diamine

Reference£º
Patent; Milne, Jill C.; Jirousek, Michael R.; Bemis, Jean E.; Vu, Chi B.; US2011/172240; (2011); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

(R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, cas is 31886-58-5, it is a common heterocyclic compound, the chiral-nitrogen-ligands compound, its synthesis route is as follows.,31886-58-5

For a preparation of Ugi amine 7 refer to Marquarding, D. et al., J. Am. Chem. Soc. 1970, 92, 5389.In a 200 ml schlenk tube, Ugi amine 7 (4 g, 15 mmol) was dissolved in Et2O (50 ml) at room temperature, n-BuLi (12 ml, 30 mmol) was added to the mixture at that temperature and stirred overnight under an inert atmosphere. The reaction mixture was cooled to -78C and Iodine (9.52 g, 37.5 mmol) dissolved in THF (60 ml) was added over the course of 10 min. The reaction was stirred at -78C for 90 min before allowing to warm to room temperature, at which point it was allowed to stirred for an additional 90 min before quenching at 0C with sodium thiosulfate(aq)(50 ml, 25% w/v). Dilute with Et2O (30 ml), the layers were separated and the aqueous layer was further extracted with ether (50 ml x 3). The combined organic fractions were dried over MgSO4solvent remove in vacuo and purified via flash column chromatography (5% MeOH, 5% TEA in DCM) to yield product (3.18 g, 55%).1H NMR (400 MHz, CDCl3) delta 4.46 (dd, J = 2.4, 1.4 Hz, 1 H), 4.24 (t, J = 2.6 Hz, 1 H), 4.15 (dd, J = 2.7, 1.3 Hz, 1 H), 4.12 (s, 5H), 3.62 (q, J = 6.8 Hz, 1 H), 2.15 (s, 6H), 1.50 (d, J = 6.8 Hz, 3H).13C NMR (101 MHz, CDCl3) delta 90.21 (ipso Cp), 74.32 (Fc), 71.67 (Fc), 68.19 (Fc), 65.59 (Fc), 57.59 (CH*), 45.49 (ipso Cp), 41.22 (CH3), 16.01 (CH3). MS (ES) (m/z) calcd for d4H18N56Fel 382.9833, found 382.9820. IR (cm-1): 3078 (=C-H), 2931 (CH2), 2878 (CH2), 2809 (CH2), 1446 (CH3), 1371 (CH3), 1243, 1087, 821 (CH=CH), 732 (CH Ar). Mp: melt at 58C-60C. aD(c = 0.0022 g/ml, DCM) = +7.3.

With the rapid development of chemical substances, we look forward to future research findings about (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine

Reference£º
Patent; THE UNIVERSITY OF BIRMINGHAM; TSELEPIS, Chris; TUCKER, James; NGUYEN, Huy Van; HODGES, Nikolas John; MEHELLOU, Youcef; WO2015/92432; (2015); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

N1,N2-Dimethylethane-1,2-diamine, cas is 110-70-3, it is a common heterocyclic compound, the chiral-nitrogen-ligands compound, its synthesis route is as follows.,110-70-3

The ligand BPMEN was synthesized via a previouslyreported procedure (Singh et al. 2017). A solution of potassiumcarbonate (5.1 g, 37 mmol) in 15 mL water was dropwiseadded to the aqueous solution of 2-(chloromethyl)-pyridine hydrochloride (3 g, 18.3 mmol in 10 mL). Afterabout 30 min of stirring at room temperature, the reactionmixture was extracted with dichloromethane (3 ¡Á 20 mL).The combined organic extracts were dried over anhydroussodium sulfate. The solution was filtered, and the solventwas removed under vacuum. The resulted residue was thendissolved in dichloromethane (10 mL). The above solutionwas added dropwise to a solution of N,N?-dimethylethylenediamine(0.942 mL, 8.75 mmol) in dichloromethane(25 mL). After this addition, 20 mL of aqueous sodiumhydroxide (1 M) was added slowly and the reaction mixturewas stirred for next 60 h at room temperature. After stirringwas finished, another fraction of sodium hydroxide (20 mL,1 M) was added rapidly. The reaction mixture was extractedwith dichloromethane (3 ¡Á 50 mL) and the combined organicportion was dried over anhydrous sodium sulfate. Evaporationof solvent led to isolation of the ligand BPMEN as adark orange oil. (2.1 g, Yield – 89%) 1H NMR (500 MHz,Methanol-d4) delta 8.45 (d, 2H, pyridine ring), 7.76 (m, 2H, pyridinering), 7.52 (d, 2H, pyridine ring), 7.30 (m, 2H, pyridinering), 3.67 (s, 4H, -N-CH2-Py), 2.63 (s, 4H, -CH2-CH2-),2.26 (s, 6H, N-CH3). ESI-MS+: [BPMEN + H]+ = 271.15 m/z+ (experimental) 271.19 m/z+ (theoretical).

With the rapid development of chemical substances, we look forward to future research findings about N1,N2-Dimethylethane-1,2-diamine

Reference£º
Article; Botcha, Niharika Krishna; Gutha, Rithvik R.; Sadeghi, Seyed M.; Mukherjee, Anusree; Photosynthesis Research; vol. 143; 2; (2020); p. 143 – 153;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

N1,N2-Dimethylethane-1,2-diamine, cas is 110-70-3, it is a common heterocyclic compound, the chiral-nitrogen-ligands compound, its synthesis route is as follows.,110-70-3

Synthesis of [N,N?-Dimethyl-N,N?-bis-(pyridine-2-ylmethyl)-1,2-diaminoethane] was taken from a previously reported procedure [16]. 2-(chloromethyl)pyridine hydrochloride (1.501 g, 9.15 mmol) dissolved in 5 mL deionized (DI) water was added dropwise to an aqueous solution containing K2CO3 (2.556 g, 18.49 mmol) dissolved in 7.5 mL DI water. The resulting mixture was stirred for 30 min. The mixture was extracted with CH2Cl2 (3¡Á10 mL). The organic phase was collected and dried with anhydrous Na2SO4. The dried solution was concentrated in vacuo to afford orange oil. A solution containing N,N?-dimethylethylenediamine (0.471 mL, 4.38 mmol) in 15 mL CH2Cl2 was added dropwise to the aforementioned orange oil dissolved in 5 mL CH2Cl2. An aqueous solution containing NaOH (0.311 g, 7.78 mmol) dissolved in 7.6 mL DI water was slowly added to organic mixture and stirred at room temperature. After 60 h, a second portion of NaOH solution(0.318 g, 7.95 mmol) was quickly added to the mixture. The combined mixture was extracted with CH2Cl2 (3¡Á20 mL) and dried with anhydrous Na2SO4. The organic solution was concentrated in vacuo to afford a brown oil, BPMEN (Yield: 0.631 g, 2.33 mmol, 70%) 1H NMR(500 MHz, CD2Cl2) delta 8.46 (dt, 2H, pyridine ring), 7.80 (m, 2H, pyridinering), 7.51 (m, 2H, pyridine ring), 7.30 (m, 2H, pyridine ring), 3.70 (m,4H, -CH2), 2.66 (m, 4H, -CH2), 2.27 (s, 6H, -CH3). ESI-MS (MeOH).Observed m/z 271.25 [BPMEN+H+] (z=1); simulated m/z 271.19.

With the rapid development of chemical substances, we look forward to future research findings about N1,N2-Dimethylethane-1,2-diamine

Reference£º
Article; Pella, Bruce J.; Niklas, Jens; Poluektov, Oleg G.; Mukherjee, Anusree; Inorganica Chimica Acta; vol. 483; (2018); p. 71 – 78;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

(R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, cas is 31886-58-5, it is a common heterocyclic compound, the chiral-nitrogen-ligands compound, its synthesis route is as follows.,31886-58-5

a) Preparation of the chlorophosphine (X3)3.85 ml (5 mmol) of S-BuLi (1.3 M in cyclohexane) are added dropwise to a solution of 1.29 g (5 mmol) of (R)-1-dimethylamino-1-ferrocenylethane in 5 ml of TBME at <-20C. After stirring the mixture at the same temperature for 10 minutes, the temperature is allowed to rise to room temperature and the mixture is stirred for another 1.5 hours. The reaction mixture is then cooled to -78C and 0.62 ml (5 mmol) of dichloroisopropylphosphine is added dropwise at such a rate that the temperature does not exceed -60C. Further stirring at -78C for 30 minutes and subsequently at room temperature for one hour gives a suspension comprising the chlorophosphine X3; Example B17: Preparation of the compound (Rc,SFc,SP)-1-[2-(1-dimethylaminoethyl)ferrocen- i-yllcyclohexylphosphino-i '-bis-beta.S-d^trifluoromethylJphenyllphosphinoferrocene (B17):4 ml (10 mmol) of n-BuLi (2.5 M in hexane) are added dropwise to a solution of 3.44 g (10 mmol) of 1 ,1 '-dibromoferrocene in 10 ml of tetrahydrofuran (THF) at a temperature of < -30C. The mixture is stirred at this temperature for a further 1.5 hours to give a suspension of 1-bromo-1 '-lithioferrocene X5.In a second reaction vessel, 7.7 ml (10 mmol) of S-BuLi (1.3 M in cyclohexane) are added dropwise to a solution of 2.57 g (10 mmol) of (R)-1-dimethylamino-1-ferrocenylethane in 15 ml of TBME at <-10C. After stirring the mixture at the same temperature for 10 minutes, the temperature is allowed to rise to 0 and the mixture is stirred for another 1.5 hours. The reaction mixture is then cooled to -78C and 1.51 ml (10 mmol) of dichlorocyclohexyl- phosphine are added. Further stirring at -78C for 30 minutes and, after removal of cooling, at room temperature for another one hour gives a suspension of the chlorophosphine X4 which is subsequently added at a temperature of <-10C to the suspension of 1-bromo-1 '-lithio- ferrocene X5. The cooling is then removed and the mixture is stirred at room temperature for a further 1.5 hours. After renewed cooling to <-50C, 4 ml (10 mmol) of n-BuLi (2.5 M in hexane) are added dropwise. After the addition, the temperature is allowed to rise to 0C and the mixture is stirred for a further 30 minutes. It is then cooled to -20C and 4.63 g (10 mmol) of bis[3,5-di(trifluoromethyl)phenyl]chlorophosphine are added. The cooling is subsequently removed and the mixture is stirred at room temperature for another 1.5 hours. The reaction mixture is admixed with 1 N NaOH and extracted. The organic phase is dried over sodium sulphate and the solvent is distilled off under reduced pressure on a rotary evaporator. The residue is subsequently heated at 150C for one hour. Chromatographic purification (silica gel 60; eluent = hexane/ethyl acetate 8:1 ) gives the compound B17 as a yellow solid (yield: 66%). 1H NMR (300 MHz, C6D6): delta 1.25 (d, 3H, J = 6.7 Hz), 1.00-2.29 (m, 1 1 H), 2.20 (s, 6H), 3.78 (m, 1 H), 4.02 (m, 1 H), 4.04 (s, 5H), 4.09 (m, 1 H), 4.14 (m, 1 H), 4.17 (m, 1 H), 4.21 (m, 1 H), 4.40 (m, 2H), 4.60 (m, 1 H), 7.80 (d, 2H, J = 6.8 Hz), 8.00 (d, 4H, J = 6.0 Hz). 31P NMR (121.5 MHz, C6D6): delta -27.1 (s); -14.1 (s).

With the rapid development of chemical substances, we look forward to future research findings about (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine

Reference£º
Patent; SOLVIAS AG; WO2007/116081; (2007); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis