Chiral nitrogen ligands

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.119139-23-0, 3,4-Di(1H-indol-3-yl)-1H-pyrrole-2,5-dione it is a common compound, a new synthetic route is introduced below.119139-23-0

General procedure: A reaction flask equipped with a magnetic stirrer was charged with a solution of 3, 4-bisindolylmaleimide (2.1 g, 6.4 mmol) in 100 mL of acetone. Potassium hydroxide (0.40 g, 7.1 mmol) was added to the solution at 0 C and stirred for 0.5 h. Iodomethane (1.6 g, 0.011 mol) or 1-bromooctane (2.4 g, 0.012 mol) was added to the reaction mixture for 3, 4-bisindolyl-1-N-methylmaleimide or 3, 4-bisindolyl-1-N-(n-octyl)maleimide, respectively. The reaction mixture was warmed to room temperature and stirred for 1 h (iodomethane) or 24 h (1-bromooctane). The reaction mixture was concentrated and then dissolved in a mixture of ethyl acetate and water. The organic phase was separated, washed with water once and brine once, dried over anhydrous sodium sulfate. The product was purified by flash chromatography with petroleum ether, ethyl acetate and dichloromethane (V/V = 3:1:2) as eluent.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3,4-Di(1H-indol-3-yl)-1H-pyrrole-2,5-dione, 119139-23-0

Reference£º
Article; Zhang, Qianfeng; Chang, Guanjun; Zhang, Lin; Chinese Chemical Letters; vol. 29; 3; (2018); p. 513 – 516;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.33527-91-2, Tris[2-(dimethylamino)ethyl]amine it is a common compound, a new synthetic route is introduced below.33527-91-2

2.1 Preparation of [Co(Me6tren)Cl](ClO4) Analytical grade (Sigma-Aldrich) chemicals were used without further purification. The complex [Co(Me6tren)Cl](ClO4) has been prepared by the published recipe [32] : CoCl2¡¤6H2O (0.200 g, 0.84 mmol) was dissolved in EtOH (20 cm3) at 55 C. Me6tren (0.214 g, 0.92 mmol) dissolved in EtOH (10 cm3) was added dropwise with stirring, forming a blue solution that was stirred overnight at room temperature. NaClO4¡¤4H2O (0.118 g, 0.84 mmol) was added with stirring inducting precipitation of pale blue [Co(Me6tren)Cl](ClO4) (0.237 g, 67%) which was separated by filtration and dried on air. Anal. Calc. for C12H30CoN4O4Cl2: C, 34.11; H, 7.16; N, 13.27. Found: C, 34.36; H, 7.21; N, 13.28%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Tris[2-(dimethylamino)ethyl]amine, 33527-91-2

Reference£º
Article; Packova, Alena; Miklovi?, Jozef; Bo?a, Roman; Polyhedron; vol. 102; (2015); p. 88 – 93;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

31886-58-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.31886-58-5, (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine it is a common compound, a new synthetic route is introduced below.

For a preparation of Ugi amine 7 refer to Marquarding, D. et al., J. Am. Chem. Soc. 1970, 92, 5389.In a 200 ml schlenk tube, Ugi amine 7 (4 g, 15 mmol) was dissolved in Et2O (50 ml) at room temperature, n-BuLi (12 ml, 30 mmol) was added to the mixture at that temperature and stirred overnight under an inert atmosphere. The reaction mixture was cooled to -78C and Iodine (9.52 g, 37.5 mmol) dissolved in THF (60 ml) was added over the course of 10 min. The reaction was stirred at -78C for 90 min before allowing to warm to room temperature, at which point it was allowed to stirred for an additional 90 min before quenching at 0C with sodium thiosulfate(aq)(50 ml, 25% w/v). Dilute with Et2O (30 ml), the layers were separated and the aqueous layer was further extracted with ether (50 ml x 3). The combined organic fractions were dried over MgSO4solvent remove in vacuo and purified via flash column chromatography (5% MeOH, 5% TEA in DCM) to yield product (3.18 g, 55%).1H NMR (400 MHz, CDCl3) delta 4.46 (dd, J = 2.4, 1.4 Hz, 1 H), 4.24 (t, J = 2.6 Hz, 1 H), 4.15 (dd, J = 2.7, 1.3 Hz, 1 H), 4.12 (s, 5H), 3.62 (q, J = 6.8 Hz, 1 H), 2.15 (s, 6H), 1.50 (d, J = 6.8 Hz, 3H).13C NMR (101 MHz, CDCl3) delta 90.21 (ipso Cp), 74.32 (Fc), 71.67 (Fc), 68.19 (Fc), 65.59 (Fc), 57.59 (CH*), 45.49 (ipso Cp), 41.22 (CH3), 16.01 (CH3). MS (ES) (m/z) calcd for d4H18N56Fel 382.9833, found 382.9820. IR (cm-1): 3078 (=C-H), 2931 (CH2), 2878 (CH2), 2809 (CH2), 1446 (CH3), 1371 (CH3), 1243, 1087, 821 (CH=CH), 732 (CH Ar). Mp: melt at 58C-60C. aD(c = 0.0022 g/ml, DCM) = +7.3.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, 31886-58-5

Reference£º
Patent; THE UNIVERSITY OF BIRMINGHAM; TSELEPIS, Chris; TUCKER, James; NGUYEN, Huy Van; HODGES, Nikolas John; MEHELLOU, Youcef; WO2015/92432; (2015); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

110-70-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.110-70-3, N1,N2-Dimethylethane-1,2-diamine it is a common compound, a new synthetic route is introduced below.

a 1,3-Dimethyl-2-(2-thienyl)-imidazolidine 23.5 g (267 mmol) of N,N’-dimethylethylenediamine were dissolved in 300 ml of toluene and treated with 29.8 g (266 mmol) of thiophene-2-carbaldehyde. The clear mixture was refluxed for 4 hours using a Dean-Stark trap. After that time 4.9 ml of water had separated in the trap. After cooling, the solution was filtered and evaporated. The oily residue was destined in vacuo. Yield: 45 g. Boiling point: 65 C. (0.1 mm Hg).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of N1,N2-Dimethylethane-1,2-diamine, 110-70-3

Reference£º
Patent; Aventis Pharma Deutschland GmbH; Genentech, Inc.; US6566366; (2003); B1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

33527-91-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.33527-91-2, Tris[2-(dimethylamino)ethyl]amine it is a common compound, a new synthetic route is introduced below.

General procedure: The copper complex Cu5-1 was dissolved in water, and an excessive amount of an aqueous solution of saturated sodium tetrafluoroborate (manufactured by Wako Pure Chemical Industries, Ltd.) was added while stirring. A precipitated solid was collected by filtering and a copper complex Cu5-72 was obtained.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Tris[2-(dimethylamino)ethyl]amine, 33527-91-2

Reference£º
Patent; FUJIFILM Corporation; Sasaki, Kouitsu; Kawashima, Takashi; Hitomi, Seiichi; Shiraishi, Yasuharu; US10215898; (2019); B2;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

N1,N2-Dimethylethane-1,2-diamine, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”110-70-3

A mixture of 2-(3-bromo-phenyl)-3,3-dimethyl-1,2,3,4-tetrahydro-quinoline-6-carboxylic acid (600 mg, 1.7 mmol), N,N’-dimethyl-ethane-1,2-diamine (0.37 mL, 3.4 mmol), copper(I) iodide (96 mg, 0.5 mmol), N,N-dimethylglycine hydrochloride (140 mg, 1.0 mmol) and potassium carbonate (923 mg, 6.7 mmol) in dimethyl sulfoxide (5 mL) was stirred at 120 C. for 16 h. Then the reaction mixture cooled to room temperature. The reaction mixture was extracted with ethyl acetate (2¡Á150 mL), washed with water (2¡Á50 mL) and saturated aqueous ammonium chloride solution (2¡Á50 mL), dried over anhydrous sodium sulfate and then concentrated in vacuo. Purification by Waters automated flash system (column: Xterra 30 mm¡Á100 mm, sample manager 2767, pump 2525, detector: ZQ mass and UV 2487, solvent system: acetonitrile and 0.1% ammonium hydroxide in water) afforded 3,3-dimethyl-2-{3-[methyl-(2-methylamino-ethyl)-amino]-phenyl}-1,2,3,4-tetrahydro-quinoline-6-carboxylic acid (500 mg, 80%) as a white solid: LC/MS m/e calcd for C22H29N3O2 (M+H)+: 368.50, observed: 368.1.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of N1,N2-Dimethylethane-1,2-diamine, 110-70-3

Reference£º
Patent; Chen, Li; Feng, Lichun; Huang, Mengwei; Liu, Yongfu; Wu, Guolong; Wu, Jim Zhen; Zhou, Mingwei; US2011/257151; (2011); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

33527-91-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.33527-91-2, Tris[2-(dimethylamino)ethyl]amine it is a common compound, a new synthetic route is introduced below.

To a mixture of Cu(NO3)22.5H2O (0.504 g, 2.17 mmol) in MeOH(15.0 mL), was added tris[2-(dimethylamino)ethyl]amine (L4)(0.500 g, 2.17 mmol) and stirred at RT. The blue solution was evaporatedunder reduced pressure to afford a yellow solid. The solidwas dissolved again in MeOH and diffused with diethyl ether. Suitableblue block-shaped crystals were obtained in 2 days. Yield(0.921 g, 98%).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Tris[2-(dimethylamino)ethyl]amine, 33527-91-2

Reference£º
Article; Sivanesan, Dharmalingam; Seo, Bongkuk; Lim, Choong-Sun; Kim, Hyeon-Gook; Journal of Catalysis; vol. 382; (2020); p. 121 – 128;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

110-70-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.110-70-3, N1,N2-Dimethylethane-1,2-diamine it is a common compound, a new synthetic route is introduced below.

To a solution of N,N?-dimethylethane-1,2-diamine (40.4 g) in DCM (300 mL) was added a solution of Boc2O (10 g, 10.6 mL, 45.8 mmol) in DCM (100 mL) dropwise at 0 C over 1 hr. The reaction mixture was stirred at room temperature for 18 hrs. The organic layer was washed with saturated aqueous NaHCO3 (50 mL), brine (50 mL), dried overNa2SO4 and concentrated in vacuo. The residue was purified by column chromatography toafford tert-butyl N-methyl-N- [2-(methylamino)ethyl]carbamate (6.8 g, Compound BC-i)as a yellow oil. 1H NMR (400MHz, CDCl3) 5 ppm: 3.34 (br. s., 2H), 2.89 (s, 3H), 2.74 (t, J= 6.7 Hz, 2H), 2.46 (s, 3H), 1.47 (s, 9H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of N1,N2-Dimethylethane-1,2-diamine, 110-70-3

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; POESCHINGER, Thomas; RIES, Carola; SHEN, Hong; YUN, Hongying; HOVES, Sabine; HAGE, Carina; (224 pag.)WO2019/166432; (2019); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

110-70-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.110-70-3, N1,N2-Dimethylethane-1,2-diamine it is a common compound, a new synthetic route is introduced below.

To a solution of N,N’-dimethylethylenediamine (1.61 gram, 18.26 mmol) in methanol (20 mL) was added dropwise a solution of 2-pyridinecarboxaldehyde (1.96 gram, 18.29 mmol) in methanol (10 mL). The reaction mixture was stirred at room temperature for 1 hour forming an orange solution. NaCNBH3 (3.5 grams, 55.7 mmol) was added followed by addition of trifluoroacetic acid (5 mL), and the solution was stirred for additional 3 hours. After neutralization with NaOH 4M solution, the crude product was extracted with 3 portions of dichloromethane (30 mL). The collected organic layer was dried over Na2S04 and solvent was removed under vacuum yielding a yellow oil in 95 % yield. (0466) 1H NMR (CDC13, 500 MHz): delta 8.54 (ddd, 1H, J=4.85Hz, J=1.85Hz, J=0.85Hz, ArH), 7.65 (td, 1H, J=7.65Hz, J=1.82Hz, ArH), 7.40 (d, 1H, J=7.84Hz, ArH), 7.16 (ddd, 1H, J=7.65Hz, J=4.80Hz, J=1.0Hz, ArH), 3.67 (s, 2H, Ar-CH2), 2.70 (t, 2H, J=6.25Hz, CH2), 2.60 (t, 2H, J=6.16Hz, CH2), 2.42 (s, 3H, CH3), 2.28 (s, 3H, CH3). (0467) 13C NMR (CDC13, 125 MHz): delta 159.61 (C), 149.25 (CH), 136.60 (CH), 123.13 (CH), 122.14 (CH), 64.26 (CH2), 56.97 (CH2), 49.44 (CH2), 42.81 (CH3), 36.50 (CH3). (0468) MS (ESI): Calc for Ci0Hi7N3: 179.3, found: 180.3 (MH+).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of N1,N2-Dimethylethane-1,2-diamine, 110-70-3

Reference£º
Patent; RAMOT AT TEL-AVIV UNIVERSITY LTD.; KOL, Moshe; ROSEN, Tomer; POPOWSKI, Yanay; (87 pag.)WO2017/137990; (2017); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

31886-58-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.31886-58-5, (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine it is a common compound, a new synthetic route is introduced below.

15.4 ml of a cyclohexane solution of s-butyllithium (1.3 M, 22 mmol) are added to a solution of 5.14 g (20 mmol) of (R)-N, N-dimethyl-1 -ferrocenylethylamine [(R)-ugi- amine] in 30 ml of t-butyl methyl ether (TBME) at <20C over a period of 10 minutes. The mixture is then heated to 00C while stirring and maintained at this temperature for 1.5 hours. It is then cooled to <60C and 2.47 ml (20 mmol) of dichlororopropyl- phosphine are added over a period of 10 mintues. After stirring at -78C for30 minutes, the mixture is allowed to warm slowly to room temperature and is stirred at this temperature for 1.5 hours. Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, 31886-58-5 Reference£º
Patent; SOLVIAS AG; WO2008/55942; (2008); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis