Chiral nitrogen ligands

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, and cas is 31886-58-5, its synthesis route is as follows.

b) Preparation of A1 (Mixture of Diastereomers); 15.5 ml (23.2 mmol) of t-butyllithium (t-BuLi) (1.5 M in pentane) are added dropwise to a solution of 5.98 g (23.2 mmol) of (R)-1-dimethylamino-1-ferrocenylethane in 40 ml of DE at <-10 C. After stirring for 10 minutes at the same temperature, the temperature is allowed to rise to room temperature and the mixture is stirred for another 1.5 hours. This gives a solution of the compound X2 which is added via a cannula to the cooled suspension of the monochlorophosphine X1 at such a rate that the temperature does not exceed -30 C. After stirring at -30 C. for a further 10 minutes, the temperature is allowed to rise to 0 C. and the mixture is stirred at this temperature for another 2 hours. The reaction mixture is admixed with 20 ml of water. The organic phase is separated off, dried over sodium sulphate and the solvent is distilled off under reduced pressure on a rotary evaporator. Purification by chromatography (silica gel 60; eluent=heptane/EtOAc/Et3N 85:10:5) gives 11.39 g of the desired product as a mixture of 2 diastereomers. This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,31886-58-5,(R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine,its application will become more common. Reference£º
Patent; Chen, Weiping; Spindler, Felix; Nettekoven, Ulrike; Pugin, Benoit; US2010/160660; (2010); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

33527-91-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Tris[2-(dimethylamino)ethyl]amine, cas is 33527-91-2,the chiral-nitrogen-ligands compound, it is a common compound, a new synthetic route is introduced below.

General procedure: The copper complex Cu5-1 was dissolved in water, and an excessive amount of an aqueous solution of saturated sodium tetrafluoroborate (manufactured by Wako Pure Chemical Industries, Ltd.) was added while stirring. A precipitated solid was collected by filtering and a copper complex Cu5-72 was obtained.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Tris[2-(dimethylamino)ethyl]amine reaction routes.

Reference£º
Patent; FUJIFILM Corporation; Sasaki, Kouitsu; Kawashima, Takashi; Hitomi, Seiichi; Shiraishi, Yasuharu; US10215898; (2019); B2;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is N1,N2-Dimethylethane-1,2-diamine, and cas is 110-70-3, its synthesis route is as follows.

N, N’-Dimethylethylenediamine (5.00g, 57mmol) was dissolved in CH2Cl2 (25mL) and cooled to 0C. Di-tert-butyl dicarbonate (5.00g, 22mmol) was dissolved in CH2Cl2 (25mL) and added dropwise to the reaction flask at 0C, and then warmed to room temperature and stirred overnight. The reaction solution was quenched with H2O (20mL), and extracted with CH2Cl2 (40mL x 2), and the combined organic layers dried with Na2SO4, filtered and concentrated. The residue was purified by column chromatography on silica gel using CH3OH/CH2Cl2 (1/20, V/V) as eluent to give 2 as colorless oil (4.37g, 81%), 1H NMR (400MHz, CDCl3) delta 3.39-3.36 (m, 2H, CH2), 2.95-2.90 (s, 3H, CH3), 2.76 (m, 2H, CH2), 2.48 (s, 3H, CH3), 1.48 (s, 9H, (CH3)3); HRMS (ESI) m/z [M+H]+ Calcd for C9H21N2O2+: 189.1603. Found: 189.1601.

110-70-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,110-70-3 ,N1,N2-Dimethylethane-1,2-diamine, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Yang, Hao; Ouyang, Yifan; Ma, Hao; Cong, Hui; Zhuang, Chunlin; Lok, Wun-Taai; Wang, Zhe; Zhu, Xuanli; Sun, Yutong; Hong, Wei; Wang, Hao; Bioorganic and Medicinal Chemistry Letters; vol. 27; 20; (2017); p. 4635 – 4642;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is N1,N2-Dimethylethane-1,2-diamine, and cas is 110-70-3, its synthesis route is as follows.

To a solution of 2-thiophenecarboxaldehyde (8.6 ml, 104 mmol) in toluene was added A110-70-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,110-70-3 ,N1,N2-Dimethylethane-1,2-diamine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; METABASIS THERAPEUTICS, INC.; WO2009/23718; (2009); A2;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

31886-58-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, cas is 31886-58-5,the chiral-nitrogen-ligands compound, it is a common compound, a new synthetic route is introduced below.

The compound having the structure shown in Formula (II) of FIG. 4 was made using the scheme set forth in FIG. 1. First, alpha-Dimethylaminoethylferrocene, (14.30 g, 55.61 mmol), (as Compound 1) was dissolved in solvent (85 ml) under argon. N-butyl lithium (1.6 M) was added slowly (22.6 ml, 66.73 mmol, 1.2 eq.) and the reaction was stirred at room temperature for one hour. The solution was then purged with argon for thirty minutes. Chlorodiphenylphosphine (12.0 ml, 66.73 mmol, 1.2 eq.) in tert-butyl methyl ether (10 ml) was added slowly, and the reaction stirred at room temperature for four hours. The reaction was cooled to 0 C., and saturated sodium bicarbonate solution (57 ml) was added followed by water (45 ml). The composition separated into aqueous and organic phases, and the aqueous layer was removed and washed with toluene, and the resulting toluene was separated from the aqueous layer and combined with the organic layer, with the resulting composition being was dried over magnesium sulfate. The magnesium sulfate hydrate was then removed by filtration. The resulting filtrate solution was concentrated under vacuum to give an orange oil. The resulting oil was dissolved in ethanol and then solvents were removed under vacuum once more. The oil was then recrystallized by dissolving in the minimum amount of hot ethanol (45 ml) and cooling to room temperature. The resulting product, present as an orange solid, contained compound 2, which was 1-alpha-dimethyl-aminoethyl-2-(diphenylphosphino)ferrocene (9.16 g, 20.7 mmol, 31% yield).

The chemical industry reduces the impact on the environment during synthesis,31886-58-5,(R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Eastman Chemical Company; How, Rebecca; Clarke, Matt; Hembre, Robert Thomas; Ponasik, James A.; Tolleson, Ginette S.; (17 pag.)US9308527; (2016); B2;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

Name is (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, as a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, and cas is 31886-58-5, its synthesis route is as follows.

The compound having the structure shown in formula (VI) of FIG. 4 was made using the scheme set forth in FIG. 2. Referring to FIG. 2, alpha-Dimethylaminoethylferrocene (as Compound 1) (0.52 g, 2.03 mmol) was dissolved in diethyl ether (8.3 ml). Next, sec-butyl lithium (2.0 ml, 1.4 M solution, 1.36 eq) was added and the mixture was stirred at room temperature overnight. Chlorobis[3,5-bis(trifluoromethyl)phenyl]phosphine (1.0 g, 2.03 mmol, 1.0 eq) in diethyl ether (1.7 ml) was added dropwise and the solution was refluxed for 5 hours. An aqueous solution saturated with sodium bicarbonate (15 ml) was added. The layers were separated and the aqueous layer washed with diethyl ether (2¡Á6 ml). The separated organic layer was combined with the diethyl ether washings and dried over magnesium sulfate. The solution was concentrated under vacuum and purified by column chromatography on alumina using 30:1 hexane:ethyl acetate as eluent. This resulted in an orange oil containing Compound 2 (0.60 g, 0.84 mmol, 41%).

31886-58-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,31886-58-5 ,(R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Eastman Chemical Company; How, Rebecca; Clarke, Matt; Hembre, Robert Thomas; Ponasik, James A.; Tolleson, Ginette S.; (17 pag.)US9308527; (2016); B2;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is Tris[2-(dimethylamino)ethyl]amine, and cas is 33527-91-2, its synthesis route is as follows.

Embodiment 5Production of [Cu(Me6tren)]BPh4 0.20 g (0.87 mmol) Me6tren (1) was dissolved in approx. 2 ml acetone and a solution of 0.30 g (0.81 mmol) [Cu(CH3CN)4]PF6 (tetrakis(acetonitrile)copper(I)-hexafluorophosphate) in approx. 4 ml acetone was added slowly under constant stirring. A solution of 0.28 g (0.82 mmol) NaBPh4 (sodium tetraphenylborate) in approx. 2 mL acetone was added subsequently to the colorless, complex solution thus obtained, for the replacement of anions. For the preparation of the solid, the complex solution was added to 20 ml diethylether. The voluminous solid of [Cu(Me6tren)]BPh4 (10) obtained was dried in vacuum. 0.48 g (96.6%) of a colorless powder was obtained as the product.All work was carried out in an argon box. It is possible, however, to carry out all work with the Schlenk technique under argon or nitrogen as well.The complex [Cu(Me6tren)]BPh4 is shown in FIG. 1.The results of the crystal structure analysis of [Cu(Me6tren)]BPh4 are shown in FIG. 2.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,33527-91-2,Tris[2-(dimethylamino)ethyl]amine,its application will become more common.

Reference£º
Patent; Schindler, Siegfried; Wuertele, Christian; US2012/16127; (2012); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

Name is N1,N2-Dimethylethane-1,2-diamine, as a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, and cas is 110-70-3, its synthesis route is as follows.

A solution of di-tert-butyl dicarbonate (4.95 g, 22.69 mmol) in CH2Cl2 (240 mL) was added dropwise to a stirred solution of N,N?-dimethylethane-1,2-diamine (4 g, 45.38 mmol) in CH2Cl2 (80 mL) over a period of 20h. The resulting mixture was stirred at r.t. for 3h. The mixture was then washed sequentially with sat. Na2CO3 (2 x 100 mL), water (50 mL), and sat. brine (50 mL). The organic solution was dried (MgSO4) and concentrated in vacuo. Purification by FCC, eluting with 0-10% CH3OH in CH2Cl2 gave the title compound (2.177 g, 51%) as a pale yellow oil; 1H NMR: 1.40 (9H, s), 2.28 (3H, s), 2.57 (2H, t), 2.79 (3H, s), 3.20 (2H, t).

110-70-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,110-70-3 ,N1,N2-Dimethylethane-1,2-diamine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; BUTTERWORTH, Sam; FINLAY, Maurice, Raymond, Verschoyle; WARD, Richard, Andrew; KADAMBAR, Vasantha, Krishna; CHANDRASHEKAR, Reddy, C.; MURUGAN, Andiappan; REDFEARN, Heather, Marie; WO2013/14448; (2013); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

31886-58-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, cas is 31886-58-5,the chiral-nitrogen-ligands compound, it is a common compound, a new synthetic route is introduced below.

Example B18: Reaction schemeX24 ml (10 mmol) of n-BuLi (2.5 M in hexane) are added dropwise to a solution of 3.44 g (10 mmol) of 1 ,1 ‘-dibromoferrocene in 10 ml of tetrahydrofuran (THF) at a temperature of < -30C. The mixture is stirred at this temperature for a further 1.5 hours. 2.21 ml (10 mmol) of dicyclohexylphosphine chloride are then added dropwise at such a rate that the temperature does not exceed -20C. After stirring the mixture for a further 10 minutes, the temperature is allowed to rise to room temperature and the mixture is stirred for another one hour. It is cooled back down to 30C and 4.4 ml (11 mmol) of n-BuLi (2.5 M in hexane) are added dropwise. The mixture is subsequently stirred at -10C for 30 minutes. The reaction mixture is then cooled to -78C and 1.49 ml (11 mmol) of dichlorophenylphosphine are added. The mixture is stirred at -78C for 20 minutes and then at room temperature for a further one hour. This gives a reaction mixture comprising the monochlorodiphosphine X6. In a second vessel, 8.5 ml (11 mmol) of S-BuLi (1.3 M in cyclohexane) are added dropwise to a solution of 2.57 g (10 mmol) of (R)-1-dimethylamino-1-ferrocenylethane in 15 ml of diethyl ether at <-10C. After stirring the mixture at the same temperature for 10 minutes, the temperature is allowed to rise to 0C and the mixture is stirred for another 1.5 hours. This reaction solution is subsequently added by means of a cannula to the reaction mixture comprising the monochlorodiphosphine X6 which has been cooled to -10C. After the addition, the mixture is stirred at room temperature for another 2 hours. After addition of 10 ml of water, the reaction mixture is extracted, the organic phase is dried over sodium sulphate and the solvent is distilled off under reduced pressure on a rotary evaporator. The residue is heated at 140C for one hour. Column chromatography (silica gel 60; eluent: hexane/ethyl acetate 4:1 ) gives the compound of the formula (B1 ) in a yield of 47%. 31P- and 1H-NMR of the product are identical with those of Example B1.; Example B19: Reaction schemeReaction mixture 1 : 4 ml (10 mmol) of n-BuLi (2.5 M in hexane) are added dropwise to a solution of 3.44 g (10 mmol) of 1 ,1 '-dibromoferrocene in 10 ml of tetrahydrofuran (THF) at a temperature of < -30C. The mixture is stirred at this temperature for a further 30 minutes. It is then cooled to -78C and 1.36 ml (10 mmol) of phenyldichlorophosphine are added. After stirring the mixture for a further 10 minutes, the temperature is allowed to rise to room temperature and the mixture is stirred for another one hour.Reaction mixture 2: In a second vessel, 8.0 ml (10.4 mmol) of S-BuLi (1.3 M in cyclohexane) are added dropwise to a solution of 2.57 g (10 mmol) of (R)-1-dimethylamino-1-ferrocenyl- ethane in 15 ml of diethyl ether at <-10C. After stirring the mixture at the same temperature for 10 minutes, the temperature is allowed to rise to 0C and the mixture is stirred for another 1.5 hours.The reaction mixture 1 is slowly added to the reaction mixture 2 at a temperature below -10C. The mixture is subsequently stirred at room temperature for 1.5 hours. At a temperature in the range from -78C to -50C, 8 ml (10.4 mmol) of S-BuLi (1.3 M in cyclohexane) are then added dropwise. After stirring the mixture at -78C for 20 minutes, the temperature is allowed to rise to 0C and the mixture is stirred for a further 30 minutes before 2.21 ml (10 mmol) of chloro- dicyclohexylphosphine are added at -20C. The mixture is stirred at 20C for another 20 minutes and finally at room temperature for another 1.5 hours. The work-up and thermal epimerization are carried out in a manner analogous to that described in Example B18. The compound of the formula (B1 ) is obtained in a yield of 31 %. 31P- and 1H-NMR of the product are identical with those of Example B1.; Example B20:8.5 ml (11 mmol) of S-BuLi (1.3 M in cyclohexane) are added dropwise to a solution of 2.83 g (1 1 mmol) of (R)-1 -dimethylamino-1 -ferrocenylethane in 15 ml of diethyl ether at <-10C. The cooling is then removed and the mixture is stirred at room temperature for another 2 hours. After cooling to -10C, 2.92 g (10 mmol) of the compound A3 are added and the mixture is stirred at this temperature for a further 30 minutes. The temperature is allowed to rise to room temperature and the mixture is stirred for another one hour. After addition of 10 ml of 1 N NaOH, the reaction mixture is extracted, the organic phase is dried over sodium sulphate and the solvent is distilled off under reduced pressure on a rotary evaporator. A 1H-NMR of the residue shows that the reaction is very stereoselective and gives virtually exclusively the desired diastereomer (RC,SFC, Sp)-I -[2-(1 -dimethylaminoethyl)ferrocen-1 -yl]phenylphosphino- 1 '-dicyclohexylphosphinoferrocene. After chromatography (silica gel 60; eluent = hexane/ethyl acetate 4:1 ), this product is obtained in a yield of 37%. 31P- and 1H-NMR of the produ…

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, 31886-58-5

Reference£º
Patent; SOLVIAS AG; WO2007/116081; (2007); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

Name is N1,N2-Dimethylethane-1,2-diamine, as a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, and cas is 110-70-3, its synthesis route is as follows.

Example 20Preparation of (E)-methyl 4-(methyl(2-((4Z,7Z,10Z,13Z,16Z,19Z)-N-methyldocosa-4,7,10,13,16,19-hexaenamido)ethyl)amino)-4-oxobut-2-enoate (Compound I-104) tert-Butyl methyl(2-(methylamino)ethyl)carbamate was prepared as follows: N1,N2-dimethylethane-1,2-diamine (40 mmol) was dissolved in 100 mL of CH2Cl2 and cooled to 0 C. A solution of di-tert-butylcarbonate (4.0 mmol) in CH2Cl2 (10 mL) was then added dropwise at 0 C. over a period of 15 min. The resulting reaction mixture was stirred at 0 C. for 30 min and then warmed to room temperature. After stirring at room temperature for 2 h, the reaction mixture was diluted with CH2Cl2 (100 mL). The organic layer was washed with brine (3¡Á25 mL), dried (Na2SO4) and concentrated under reduced pressure to afford tert-butyl methyl(2-(methylamino)ethyl)carbamate. This amine was subjected to the same reaction conditions outlined earlier in the preparation of (E)-methyl 4-(2-(4Z,7Z,10Z,13Z,16Z,19Z)-docosa-4,7,10,13,16,19-hexaenamidoethylamino)-4-oxobut-2-enoate. The desired product, namely (E)-methyl 4-(methyl(2-((4Z,7Z,10Z,13Z,16Z,19Z)-N-methyldocosa-4,7,10,13,16,19-hexaenamido)ethyl)amino)-4-oxobut-2-enoate, was obtained after purification by silica gel chromatography. MS (EI) calcd for C31H46N2O4: 510.35. found 511 (M+1).

110-70-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,110-70-3 ,N1,N2-Dimethylethane-1,2-diamine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Milne, Jill C.; Jirousek, Michael R.; Bemis, Jean E.; Vu, Chi B.; US2011/172240; (2011); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis