Category: chiral-nitrogen-ligands

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO17,mainly used in chemical industry, its synthesis route is as follows.,110-70-3

General procedure: To a cooled to 0 C suspension consisting of N,N’-dimethyl-1,2-ethylenediamine (4.4 g, 0.05 mol), sodium bicarbonate (33.6 g, 0.40 mol), and CH2Cl2 (50 mL), a solution of 2-bromopropionyl chloride (1a) (25.7 g, 0.15 mol) in CH2Cl2 (40 mL) was added. The reaction temperature was maintained within 0-5 C and the addition time was 40 min. The mixture was stirred for 4 h at the same temperature. Water (130 mL) and CH2Cl2 (60 mL) were added and the organic layer was separated. The combined organic fractions were dried over sodium sulfate. The solvent was removed under reduced pressure. The residue was treated with hexane (30 mL) and a solid product was filtered off and recrystallized from diethyl ether to give pure compound 2a (13.25 g, 74%), m.p. 77.0-77.4 C (from diethyl ether).

With the synthetic route has been constantly updated, we look forward to future research findings about N1,N2-Dimethylethane-1,2-diamine,belong chiral-nitrogen-ligands compound

Reference£º
Article; Goncharova; Yakushchenko; Raevskaya; Yakushchenko; Konovalova; Russian Chemical Bulletin; vol. 68; 1; (2019); p. 181 – 185; Izv. Akad. Nauk, Ser. Khim.; 1; (2019); p. 181 – 185,5;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

N1,N2-Dimethylethane-1,2-diamine, cas is 110-70-3, it is a common heterocyclic compound, the chiral-nitrogen-ligands compound, its synthesis route is as follows.,110-70-3

2-(2-methoxyphenyl)-1,3-dimethylimidazolidine. A solution of o-anisaldehyde (9.0 g, 66 mmol) and N,N’-dimethylethylenediamine (7.9 mL, 73 mmol) in ethanol (180 mL) was stirred at r.t. for overnight. MgSO4 (30 g) was added and the mixture was stirred for 20 min. The reaction mixture was filtered and washed with ether. The solvent was removed in vacuo to afford 2-(2-methoxyphenyl)-1,3-dimethylimidazolidine as a light yellow solid, 12 g, yield 88%. 1H NMR (500 MHz, CHLOROFORM-D) delta ppm 2.21 (s, 6H) 2.57-2.72 (m, 2H) 3.34 (d, J=2.75 Hz, 2H) 3.82 (s, 3H) 4.13 (s, 1H) 6.88 (d, J=8.24 Hz, 1H) 7.00 (t, J=7.48 Hz, 1H) 7.25-7.30 (m, 1H) 7.67 (d, J=7.63 Hz, 1H).

With the synthetic route has been constantly updated, we look forward to future research findings about N1,N2-Dimethylethane-1,2-diamine,belong chiral-nitrogen-ligands compound

Reference£º
Patent; Bristol-Myers Squibb Company; US2007/270406; (2007); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belong chiral-nitrogen-ligands compound,(R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine,31886-58-5,Molecular formula: C14H19FeN,mainly used in chemical industry, its synthesis route is as follows.,31886-58-5

(S)-Ugi-amine 1 (2.57 g, 10 mmol) was dissolved in 25 mL of diethyl ether, and n-butyllithium (8 mL, 2.5 mol/L) was added dropwise to the reaction system under nitrogen protection and ice salt bath cooling. After that, the temperature was slowly raised to room temperature, and the reaction was stirred for 3 hours. To the ice salt bath, chlorobis(3,5-di-t-butylphenyl)phosphine (8.90 g, 20 mmol) was added dropwise thereto, and after the completion of the dropwise addition, the mixture was slowly warmed to room temperature, and the reaction was stirred for 24 hours. The reaction was quenched with saturated sodium bicarbonate solution and extracted with dichloromethane. Dry over anhydrous sodium sulfate, Concentration and column chromatography gave product 7 (3.79 g, 57%).

With the synthetic route has been constantly updated, we look forward to future research findings about (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine,belong chiral-nitrogen-ligands compound

Reference£º
Patent; Zhejiang University of Technology; Zhong Weihui; Ling Fei; Nian Sanfei; (14 pag.)CN108774271; (2018); A;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

31886-58-5, (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine is a chiral-nitrogen-ligands compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,31886-58-5

General procedure: 0C, N2,7 mL of tBuLi in n-hexane (1.6 mol/L, 11.2 mmol) was added dropwise with stirringCompound 1 (2.57 g, 10 mmol) in anhydrous ether (20 mL),After the addition, the mixture was naturally warmed to room temperature and stirred for 2 hours. Then cool down to -78C,The redistilled PCl3 (11.46 mmol, 1 mL) was slowly added dropwise, and the mixture was warmed to room temperature.The reaction was overnight. Then cool down to -78C again.A solution of R2MgBr (prepared from 30 mmol of R2Br and 0.8 g, 33.3 mmol of magnesium turnings in tetrahydrofuran) was slowly added dropwise using a constant pressure funnel. After the addition, slowly warm up the reaction overnight.Then 20 mL of saturated NH4Cl solution was added. The oil phase was extracted three times with 20 mL ether.After the oil phase was dried over anhydrous sodium sulfate, it was spin-dried, and the silica gel was subjected to a chromatography to obtain the target compound 2 .

31886-58-5 (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine 16212257, achiral-nitrogen-ligands compound, is more and more widely used in various.

Reference£º
Patent; Kaitelisi (Shenzhen) Technology Co., Ltd.; Zhang Xumu; Liang Zhiqin; (17 pag.)CN107722068; (2018); A;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.33527-91-2,Tris[2-(dimethylamino)ethyl]amine,as a common compound, the synthetic route is as follows.,33527-91-2

General procedure: The copper complex Cu5-1 was dissolved in water, and an excessive amount of an aqueous solution of saturated sodium tetrafluoroborate (manufactured by Wako Pure Chemical Industries, Ltd.) was added while stirring. A precipitated solid was collected by filtering and a copper complex Cu5-72 was obtained.

The synthetic route of 33527-91-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; FUJIFILM Corporation; Sasaki, Kouitsu; Kawashima, Takashi; Hitomi, Seiichi; Shiraishi, Yasuharu; US10215898; (2019); B2;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO212,mainly used in chemical industry, its synthesis route is as follows.,33527-91-2

To a solution of tris(2-dimethylaminoethyl)amine (0.404 g, 1.75 mmol) in acetonitrile (4 mL) was added 1-bromotetradecane (1.47 g, 5.32 mmol). Theresulting mixture was heated at reflux with stirring for 23 hours, during which time a white solid was observed. After cooling, and the addition of a cold hexanes/acetone mixture (15 mL, 1:1), to the reaction flask, the precipitate was filtered with a Buchner funnel, and rinsed with a cold hexanes/acetone mixture (20 mL, 1:1), resulting in T-14,14,14 (1.31 g, 70%) as a white powder; mp=229-258 C; ?H NMR(300 MI-Tz, CDC13) 34.10-4.02 (m, 6H), 3.63-3.54 (m, 6H), 3.39-3.22 (m, 24H), 1.73-1.61 (m, 6H), 1.36-1.06 (m, 66H), 0.84-0.77 (m, 9H); ?3C NMR (75 MHz, CD3OD) 365.3, 61.0, 50.1, 46.9, 31.7, 29.4, 29.4, 29.3, 29.3, 29.1, 29.0, 26.1, 22.5, 22.4, 13.1; high resolution mass spectrum (ESI) m/z 273.9766 ([Mj3 calculated for [C54H,,7N4j3t 273.9754). See also Yoshimura et al., 2012, Langmuir 28:9322-933 1.?H and ?3C NMR spectra of compound T-14,14,14 can be found in Figure 53.

With the complex challenges of chemical substances, we look forward to future research findings about Tris[2-(dimethylamino)ethyl]amine,belong chiral-nitrogen-ligands compound

Reference£º
Patent; TEMPLE UNIVERSITY-OF THE COMMONWEALTH SYSTEM OF HIGHER EDUCATION; VILLANOVA UNIVERSITY; WUEST, William, M.; MINBIOLE, Kevin, P.C.; BARBAY, Deanna, L.; (227 pag.)WO2016/172436; (2016); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.31886-58-5,(R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine,as a common compound, the synthetic route is as follows.,31886-58-5

b) Preparation of L (mixture of diastereomers).At <-100C, 15.5 ml (23.2 mmol) of t-butyllithium (t-Bu-Li) (1.5 M in pentane) are added dropwise to a solution of 5.98 g (23.2 mmol) of (R)-1 -dimethylamino-1 - ferrocenylethane in 40 ml of diethyl ether (DE). After stirring at the same temperature for 10 minutes, the temperature is allowed to rise to room temperature and the mixture is stirred for another 1.5 hours. A solution of the compound X2 is thus obtained, which is added via a cannula to the cooled suspension of the monochlorophosphine X1 at a sufficiently slow rate that the temperature does not exceed -300C. After stirring at -30C for a further 10 minutes, the temperature is allowed to rise to 0C, and the mixture is stirred at this temperature for another 2 hours. The reaction mixture is admixed with 20 ml of water. The organic phase is removed and dried over sodium sulphate, and the solvent is distilled off on a rotary evaporator under reduced pressure. After chromatographic purification (silica gel 60; eluent = heptane/ethyl acetate(EA)/Nethyl3(Net3) 85:10:5), 11.39 g of the desired product are obtained as a mixture of 2 diastereomers. The synthetic route of 31886-58-5 has been constantly updated, and we look forward to future research findings. Reference£º
Patent; SPEEDEL EXPERIMENTA AG; WO2008/113835; (2008); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis