Category: chiral-nitrogen-ligands

Name is (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, as a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, and cas is 31886-58-5, its synthesis route is as follows.

500 mg (R)-N,N-dimethylferrocene amine (shown in formula a) is added to the ether solution to dissolve, and the reaction system is cooled to At -78 , add 1.2eq n-butyllithium, 1.2eqTMEDA, 1.1eq elemental iodine, react at low temperature for 30 minutes, naturally rise to room temperature, detect the reaction by TLC, quench the reaction after the reaction is completed, ethyl acetate extraction, concentration, column Chromatographic separation yields the target product (represented by formula b).Dissolve 480 mg of the obtained product in tetrahydrofuran, add 12 mg of palladium metal catalyst and 100 mg of pyridine boric acid, react at room temperature, and check the reaction after 4 hours. After the reaction is complete, directly concentrate through the column to separate. In the method, 450 mg of diphenylphosphinomethanamine was added, and the reaction was refluxed for 2 hours. The reaction was detected by TLC, and finally the target product (represented by Formula A1) was obtained, with a total yield of 31%.

31886-58-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,31886-58-5 ,(R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Jiangsu Pharmaceutical Profession College; Qi Liang; Lin Rui; (8 pag.)CN110845547; (2020); A;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

33527-91-2, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”33527-91-2

Ni(CH3COO)2 (53 mg, 0,30 mmol) was dissolved in the smallest possible amount of methanol while an excess of Me6TREN was dissolved in acetone. After addition of the second solution to the first one, a change in colour from light blue to green was observed. An excess of KPF6, dissolved in acetone, was added to the previous solution in order to promote the anion metathesis reaction. The solvent was evaporated and the green solid obtained was dissolved in pure acetone. A white solid remained undissolved on the bottomof the flask (CH3COOK) and was filtered off. The solution was dried under vacuum and the solid dissolved in dichloromethane in order to eliminate the excess of KPF6. After filtration of the solid residue,the solution was reduced in volume and the pure product 2 was precipitated upon addition of n-pentane. Crystals suitable for XRD were grown at low temperature by slow diffusion of n-pentane into a dichloromethane solution of 2. Yield: 86%; Anal. Calc. for[Ni(L1)(CH3COO)](PF6)H2O: C, 32.90; H, 6.90; N, 10.96. Found: C,33.23; H, 6.97; N, 10.93%.

33527-91-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,33527-91-2 ,Tris[2-(dimethylamino)ethyl]amine, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Tordin, Elisa; List, Manuela; Monkowius, Uwe; Schindler, Siegfried; Knoer, Guenther; Inorganica Chimica Acta; vol. 402; (2013); p. 90 – 96;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

110-70-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. N1,N2-Dimethylethane-1,2-diamine, cas is 110-70-3,the chiral-nitrogen-ligands compound, it is a common compound, a new synthetic route is introduced below.

Example 1203 ,3 -Dimethyl-2-{3 – [methyl- (2-methylamino-ethyl) -amino] -phenyl}- 1 ,2,3 ,4- tetrahydro-quinoline-6-carboxylic acidA mixture of 2-(3-bromo-phenyl)-3,3-dimethyl-l,2,3,4-tetrahydro-quinoline-6-carboxylic acid (600 mg, 1.7 mmol), N,N’-dimethyl-ethane-l,2-diamine (0.37 mL, 3.4 mmol), copper(I) iodide (96 mg, 0.5 mmol), N, N-dimethylglycine hydrochloride (140 mg, 1.0 mmol) and potassium carbonate (923 mg, 6.7 mmol) in dimethyl sulfoxide (5 mL)was stirred at 120C for 16 h. Then the reaction mixture cooled to room temperature. The reaction mixture was extracted with ethyl acetate (2 x 150 mL), washed with water (2 x 50 mL) and saturated aqueous ammonium chloride solution (2 x 50 mL), dried over anhydrous sodium sulfate and then concentrated in vacuo. Purification by Waters automated flash system (column: Xterra 30 mm x 100 mm, sample manager 2767, pump 2525, detector: ZQ mass and UV 2487, solvent system: acetonitrile and 0.1% ammonium hydroxide in water) afforded 3,3-dimethyl-2-{3- [methyl-(2-methylamino-ethyl)-amino] – phenyl} -l,2,3,4-tetrahydro-quinoline-6-carboxylic acid (500 mg, 80%) as a white solid : LC/MS m/e calcd for C22H29N3O2 (M+H)+: 368.50, observed: 368.1.

The chemical industry reduces the impact on the environment during synthesis,110-70-3,N1,N2-Dimethylethane-1,2-diamine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; CHEN, Li; FENG, Lichun; HUANG, Mengwei; LIU, Yongfu; WU, Guolong; WU, Jim, Zhen; ZHOU, Mingwei; WO2011/128251; (2011); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

Name is Tris[2-(dimethylamino)ethyl]amine, as a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, and cas is 33527-91-2, its synthesis route is as follows.

LiBEt3H (1 mL, 1.0 M in THF, 1 mmol) and Me6TREN (0.26 mL,1 mmol) were added to 5 mL of hexane, precipitating a white powder.THF was slowly added dropwise with stirring until a homogeneoussolution was obtained (approx. 3 mL) Cooling of the solutionat 30 C yielded X-ray quality colorless crystals (225 mg, 67%).1H NMR (400.1 MHz, C6D6, 300 K): delta 2.06 (s, 18H, Me6TREN Me),1.86 (t, 6H, 3JHH = 4.95 Hz, Me6TREN CH2), 1.78 (t, 6H, 3JHH = 4.95 Hz,Me6TREN CH2), 1.54 (t, 9H, 3JHH = 7.43 Hz, BCH2CH3), 0.95 ppm(q, 6H, 3JHH = 7.43 Hz, BCH2CH3).13C NMR (100.6 MHz, C6D6, 300 K): delta 57.2 (Me6TREN CH2), 50.6(Me6TREN CH2), 45.7 (Me6TREN Me), 16.7 (m, 1JBC = 41.5 Hz,BCH2CH3), 14.2 ppm (BCH2CH3).7Li NMR (155.5 MHz, C6D6, 300 K): delta 0.18 ppm.11B NMR (128.3 MHz, C6D6, 300 K): delta 11.3 ppm (broad singlet).Elemental analysis for C18H46N4LiB: Calc.: C, 64.28; H, 13.79; N,16.66. Found: C, 64.24; H, 13.49; N, 16.75%.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,33527-91-2,Tris[2-(dimethylamino)ethyl]amine,its application will become more common.

Reference£º
Article; Kennedy, Alan R.; McLellan, Ross; McNeil, Greg J.; Mulvey, Robert E.; Robertson, Stuart D.; Polyhedron; vol. 103; (2016); p. 94 – 99;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

Name is (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, as a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, and cas is 31886-58-5, its synthesis route is as follows.

General procedure: 0C, N2,7 mL of tBuLi in n-hexane (1.6 mol/L, 11.2 mmol) was added dropwise with stirringCompound 1 (2.57 g, 10 mmol) in anhydrous ether (20 mL),After the addition, the mixture was naturally warmed to room temperature and stirred for 2 hours. Then cool down to -78C,The redistilled PCl3 (11.46 mmol, 1 mL) was slowly added dropwise, and the mixture was warmed to room temperature.The reaction was overnight. Then cool down to -78C again.A solution of R2MgBr (prepared from 30 mmol of R2Br and 0.8 g, 33.3 mmol of magnesium turnings in tetrahydrofuran) was slowly added dropwise using a constant pressure funnel. After the addition, slowly warm up the reaction overnight.Then 20 mL of saturated NH4Cl solution was added. The oil phase was extracted three times with 20 mL ether.After the oil phase was dried over anhydrous sodium sulfate, it was spin-dried, and the silica gel was subjected to a chromatography to obtain the target compound 2 .

31886-58-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,31886-58-5 ,(R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Kaitelisi (Shenzhen) Technology Co., Ltd.; Zhang Xumu; Liang Zhiqin; (17 pag.)CN107722068; (2018); A;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is Tris[2-(dimethylamino)ethyl]amine, and cas is 33527-91-2, its synthesis route is as follows.

General procedure: The copper complex Cu5-1 was dissolved in water, and an excessive amount of an aqueous solution of saturated sodium tetrafluoroborate (manufactured by Wako Pure Chemical Industries, Ltd.) was added while stirring. A precipitated solid was collected by filtering and a copper complex Cu5-72 was obtained.

The chemical industry reduces the impact on the environment during synthesis,33527-91-2,Tris[2-(dimethylamino)ethyl]amine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; FUJIFILM Corporation; Sasaki, Kouitsu; Kawashima, Takashi; Hitomi, Seiichi; Shiraishi, Yasuharu; US10215898; (2019); B2;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

It is a common heterocyclic compound, the chiral-nitrogen-ligands compound, (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, cas is 31886-58-5 its synthesis route is as follows.

b) Preparation of L (mixture of diastereomers).At <-100C, 15.5 ml (23.2 mmol) of t-butyllithium (t-Bu-Li) (1.5 M in pentane) are added dropwise to a solution of 5.98 g (23.2 mmol) of (R)-1 -dimethylamino-1 - ferrocenylethane in 40 ml of diethyl ether (DE). After stirring at the same temperature for 10 minutes, the temperature is allowed to rise to room temperature and the mixture is stirred for another 1.5 hours. A solution of the compound X2 is thus obtained, which is added via a cannula to the cooled suspension of the monochlorophosphine X1 at a sufficiently slow rate that the temperature does not exceed -300C. After stirring at -30C for a further 10 minutes, the temperature is allowed to rise to 0C, and the mixture is stirred at this temperature for another 2 hours. The reaction mixture is admixed with 20 ml of water. The organic phase is removed and dried over sodium sulphate, and the solvent is distilled off on a rotary evaporator under reduced pressure. After chromatographic purification (silica gel 60; eluent = heptane/ethyl acetate(EA)/Nethyl3(Net3) 85:10:5), 11.39 g of the desired product are obtained as a mixture of 2 diastereomers. 31886-58-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,31886-58-5 ,(R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; SPEEDEL EXPERIMENTA AG; WO2008/113835; (2008); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

Name is (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, as a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, and cas is 31886-58-5, its synthesis route is as follows.

General procedure: To a solution of (R)-Ugi?s amine 3 (2.57 g, 10 mmol) in TBME (20 mL) was added 1.6 M t-BuLi solution in n-hexane (6.8 mL, 10.88 mmol) at 0 C. After the addition was complete, the mixture was warmed to room temperature, and stirred for 1.5 h at room temperature. The mixture was then cooled to 0 C again, and Ar2PCl (11 mmol) was added in one portion. After stirring for 20 min at 0 C, the mixture was warmed to room temperature, and stirred for 1.5 h at room temperature. The mixture was then quenched by the addition of saturated NaHCO3 solution (20 mL). The organic layer was separated and dried over MgSO4, and the solvent was removed under reduced pressure, after which the filtrate was concentrated. The residue was purified by chromatography to afford 4a, 4e, and 4f.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, 31886-58-5

Reference£º
Article; Nie, Huifang; Zhou, Gang; Wang, Quanjun; Chen, Weiping; Zhang, Shengyong; Tetrahedron Asymmetry; vol. 24; 24; (2013); p. 1567 – 1571;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is Tris[2-(dimethylamino)ethyl]amine, and cas is 33527-91-2, its synthesis route is as follows.

To a solution of tris(2-dimethylaminoethyl)amine (0.404 g, 1.75 mmol) in acetonitrile (4 mL) was added 1-bromotetradecane (1.47 g, 5.32 mmol). Theresulting mixture was heated at reflux with stirring for 23 hours, during which time a white solid was observed. After cooling, and the addition of a cold hexanes/acetone mixture (15 mL, 1:1), to the reaction flask, the precipitate was filtered with a Buchner funnel, and rinsed with a cold hexanes/acetone mixture (20 mL, 1:1), resulting in T-14,14,14 (1.31 g, 70%) as a white powder; mp=229-258 C; ?H NMR(300 MI-Tz, CDC13) 34.10-4.02 (m, 6H), 3.63-3.54 (m, 6H), 3.39-3.22 (m, 24H), 1.73-1.61 (m, 6H), 1.36-1.06 (m, 66H), 0.84-0.77 (m, 9H); ?3C NMR (75 MHz, CD3OD) 365.3, 61.0, 50.1, 46.9, 31.7, 29.4, 29.4, 29.3, 29.3, 29.1, 29.0, 26.1, 22.5, 22.4, 13.1; high resolution mass spectrum (ESI) m/z 273.9766 ([Mj3 calculated for [C54H,,7N4j3t 273.9754). See also Yoshimura et al., 2012, Langmuir 28:9322-933 1.?H and ?3C NMR spectra of compound T-14,14,14 can be found in Figure 53.

33527-91-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,33527-91-2 ,Tris[2-(dimethylamino)ethyl]amine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; TEMPLE UNIVERSITY-OF THE COMMONWEALTH SYSTEM OF HIGHER EDUCATION; VILLANOVA UNIVERSITY; WUEST, William, M.; MINBIOLE, Kevin, P.C.; BARBAY, Deanna, L.; (227 pag.)WO2016/172436; (2016); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

110-70-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. N1,N2-Dimethylethane-1,2-diamine, cas is 110-70-3,the chiral-nitrogen-ligands compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 12 N-Boc-N,N’-dimethylethylene diamine N,N’-dimethyl ethylenediamine (8.8 g) was dissolved in 200 ml tetrahydrofuran and to this was added over a 10 min period di-t-butyldicarbonate (4.36 g) in 30 mL tetrahydrofuran. 72 hours later, the solvent was evaporated and the residue partitioned between ether and KHCO3 and the organic layer was dried (MgSO4) and evaporated to give 11.6 g title compound (58% yield). 300 MHz 1 H NMR was consistent with proposed structure.

The chemical industry reduces the impact on the environment during synthesis,110-70-3,N1,N2-Dimethylethane-1,2-diamine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; G. D. Searle & Co.; US4902706; (1990); A;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis