Category: chiral-nitrogen-ligands

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is N1,N2-Dimethylethane-1,2-diamine, and cas is 110-70-3, its synthesis route is as follows.

General procedure: CD-1 to CD-9 were synthesized according to the procedure reported in Ref. [18]; a representative synthesis is shown in Scheme 2. Nucleophilic substitution of mono(6-O-p- tolylsulfonyl)-beta-CD (6.4459 g, 5 mmol) with the corresponding amine (25 mmol) was performed by reaction in anhydrous dimethylformamide (DMF) at 80 C in a nitrogen atmospherefor 24.0 h, followed by cooling to room temperature. (S)-Prolinamide and (R)-prolinamide were reduced with LiAlH4 to (S)-2-aminomethylpyrrolidine and (R)-2- aminomethylpyrrolidine.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of N1,N2-Dimethylethane-1,2-diamine, 110-70-3

Reference£º
Article; Zhu, Qingying; Shen, Haimin; Yang, Zhujin; Ji, Hongbing; Cuihua Xuebao/Chinese Journal of Catalysis; vol. 37; 8; (2016); p. 1227 – 1234;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

Name is Tris[2-(dimethylamino)ethyl]amine, as a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, and cas is 33527-91-2, its synthesis route is as follows.

LiBH4 (22 mg, 1 mmol) and Me6TREN (0.52 mL, 2 mmol) wereadded to 5 mL of THF. This was heated to reflux for 1 h at whichpoint the heat and stirrer were turned off. Slow cooling of the solutionyielded X-ray quality colorless crystals (40 mg, 16%).1H NMR (400.1 MHz, C6D6, 300 K): delta 2.11 (s, 18H, Me6TREN Me),1.94, 1.90 (overlapping br s, 12H, Me6TREN CH2), 0.59 ppm(quartet/septet, 4H, BH4, 1J10BH = 27.5 Hz, 1J11BH = 81.5 Hz).13C NMR (100.6 MHz, C6D6, 300 K): delta 57.0 (CH2), 51.2 (CH2),45.7 ppm (Me).7Li NMR (155.5 MHz, C6D6, 300 K): delta 0.29 ppm.11B NMR (128.3 MHz, C6D6, 300 K): delta 39.5 ppm (quin,1JBH = 81.2 Hz).Elemental analysis for C12H34N4LiB: Calc.: C, 57.15; H, 13.59; N,22.22. Found: C, 57.16; H, 13.48; N, 22.59%.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,33527-91-2,Tris[2-(dimethylamino)ethyl]amine,its application will become more common.

Reference£º
Article; Kennedy, Alan R.; McLellan, Ross; McNeil, Greg J.; Mulvey, Robert E.; Robertson, Stuart D.; Polyhedron; vol. 103; (2016); p. 94 – 99;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

110-70-3, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. N1,N2-Dimethylethane-1,2-diamine, cas is 110-70-3,the chiral-nitrogen-ligands compound. Here is a downstream synthesis route of the compound.

To a solution of N,N?-dimethylethane-1,2-diamine (40.4 g) in DCM (300 mL) was added a solution of Boc2O (10 g, 10.6 mL, 45.8 mmol) in DCM (100 mL) dropwise at 0 C over 1 hr. The reaction mixture was stirred at room temperature for 18 hrs. The organic layer was washed with saturated aqueous NaHCO3 (50 mL), brine (50 mL), dried overNa2SO4 and concentrated in vacuo. The residue was purified by column chromatography toafford tert-butyl N-methyl-N- [2-(methylamino)ethyl]carbamate (6.8 g, Compound BC-i)as a yellow oil. 1H NMR (400MHz, CDCl3) 5 ppm: 3.34 (br. s., 2H), 2.89 (s, 3H), 2.74 (t, J= 6.7 Hz, 2H), 2.46 (s, 3H), 1.47 (s, 9H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of N1,N2-Dimethylethane-1,2-diamine, 110-70-3

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; POESCHINGER, Thomas; RIES, Carola; SHEN, Hong; YUN, Hongying; HOVES, Sabine; HAGE, Carina; (224 pag.)WO2019/166432; (2019); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is Tris[2-(dimethylamino)ethyl]amine, and cas is 33527-91-2, its synthesis route is as follows.

General procedure: LiBH4 (22 mg, 1 mmol) and Me6TREN (0.52 mL, 2 mmol) wereadded to 5 mL of THF. This was heated to reflux for 1 h at whichpoint the heat and stirrer were turned off. Slow cooling of the solutionyielded X-ray quality colorless crystals

33527-91-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,33527-91-2 ,Tris[2-(dimethylamino)ethyl]amine, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Kennedy, Alan R.; McLellan, Ross; McNeil, Greg J.; Mulvey, Robert E.; Robertson, Stuart D.; Polyhedron; vol. 103; (2016); p. 94 – 99;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

33527-91-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Tris[2-(dimethylamino)ethyl]amine, cas is 33527-91-2,the chiral-nitrogen-ligands compound, it is a common compound, a new synthetic route is introduced below.

General procedure: LiBEt3H (1 mL, 1.0 M in THF, 1 mmol) and Me6TREN (0.26 mL,1 mmol) were added to 5 mL of hexane, precipitating a white powder.THF was slowly added dropwise with stirring until a homogeneoussolution was obtained (approx. 3 mL) Cooling of the solutionat 30 C yielded X-ray quality colorless crystals

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,33527-91-2,Tris[2-(dimethylamino)ethyl]amine,its application will become more common.

Reference£º
Article; Kennedy, Alan R.; McLellan, Ross; McNeil, Greg J.; Mulvey, Robert E.; Robertson, Stuart D.; Polyhedron; vol. 103; (2016); p. 94 – 99;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

31886-58-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, cas is 31886-58-5,the chiral-nitrogen-ligands compound, it is a common compound, a new synthetic route is introduced below.

(S)-Ugi-amine 1 (2.57 g, 10 mmol) was dissolved in 25 mL of diethyl ether, and n-butyllithium (8 mL, 2.5 mol/L) was added dropwise to the reaction system under nitrogen protection and ice salt bath cooling. After that, the temperature was slowly raised to room temperature, and the reaction was stirred for 3 hours. To the ice salt bath, chlorobis(3,5-di-t-butylphenyl)phosphine (8.90 g, 20 mmol) was added dropwise thereto, and after the completion of the dropwise addition, the mixture was slowly warmed to room temperature, and the reaction was stirred for 24 hours. The reaction was quenched with saturated sodium bicarbonate solution and extracted with dichloromethane. Dry over anhydrous sodium sulfate, Concentration and column chromatography gave product 7 (3.79 g, 57%).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, 31886-58-5

Reference£º
Patent; Zhejiang University of Technology; Zhong Weihui; Ling Fei; Nian Sanfei; (14 pag.)CN108774271; (2018); A;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

It is a common heterocyclic compound, the chiral-nitrogen-ligands compound, Tris[2-(dimethylamino)ethyl]amine, cas is 33527-91-2 its synthesis route is as follows.

General procedure: The copper complex Cu5-1 was dissolved in water, and an excessive amount of an aqueous solution of saturated sodium tetrafluoroborate (manufactured by Wako Pure Chemical Industries, Ltd.) was added while stirring. A precipitated solid was collected by filtering and a copper complex Cu5-72 was obtained.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,33527-91-2,Tris[2-(dimethylamino)ethyl]amine,its application will become more common.

Reference£º
Patent; FUJIFILM Corporation; Sasaki, Kouitsu; Kawashima, Takashi; Hitomi, Seiichi; Shiraishi, Yasuharu; US10215898; (2019); B2;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is Tris[2-(dimethylamino)ethyl]amine, and cas is 33527-91-2, its synthesis route is as follows.

To a solution of tris(2-dimethylaminoethyl)amine (0.401 g, 1.74 mmol) in acetonitrile (4 mL) was added 1-bromododecane (1.34 g, 5.38 mmol). The resulting mixture was heated at reflux with stirring for 22 hours, during which time awhite solid was observed. After cooling, and the addition of a cold hexanes/acetone mixture (15 mL, 1:1), to the reaction flask, the precipitate was filtered with a Buchner funnel, and rinsed with a cold hexanes/acetone mixture (20 mL, 1:1), resulting in T-12,12,12 (1.39 g, 82%) as a white powder; mp=225-254 C; ?H NMR (300 JVII-Tz, CDC13) oe 4.11-4.03 (m, 6H), 3.63-3.55 (m, 6H), 3.39-3.32 (m, 6H), 3.30(s, 18H), 1.72-1.62 (m, 6H), 1.37-1.14 (m, 54H), 0.84-0.78 (m, 9H); ?3C NMR (75 MHz, CD3OD) 3 65.3, 61.0, 50.1, 46.8, 31.7, 29.4, 29.3, 29.3, 29.1, 29.0, 26.1, 22.4, 22.4, 13.1; high resolution mass spectrum (ESI) m/z 245.9435 ([Mj3 calculated for [C48H,o5N4j3: 245.9441). See also Yoshimura et al., 2012, Langmuir 28:9322-933 1. ?H and ?3C NMR spectra of compound T-12,12,12 can be found in Figure 52.

33527-91-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,33527-91-2 ,Tris[2-(dimethylamino)ethyl]amine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; TEMPLE UNIVERSITY-OF THE COMMONWEALTH SYSTEM OF HIGHER EDUCATION; VILLANOVA UNIVERSITY; WUEST, William, M.; MINBIOLE, Kevin, P.C.; BARBAY, Deanna, L.; (227 pag.)WO2016/172436; (2016); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

Name is N1,N2-Dimethylethane-1,2-diamine, as a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, and cas is 110-70-3, its synthesis route is as follows.

HL1 was prepared by a modification of a method previouslyreported [23] and characterised by 1H NMR spectroscopy. Theligand was obtained as follows: to a solution of 2-hydroxybenzaldehyde(6.10 mL, 82.95 mmol) in absolute ethanol (250 mL),N,N’-dimethylethylenediamine (13.1 g, 100 mmol) and MgSO4were added. The suspension was stirred at room temperature for16 h and then filtered. The filtrate was concentrated under pressureto yield a yellow liquid, which was purified by distillation ina glass oven. Yield: 14.03 g (88%), b.p.: 145 C. 1H NMR (300 Hz,CDCl3) d: 11.52 (s, 1H, OH); 7.21 (td, J = 8.1 and 1.8 Hz, 1H, H6);6.97 (dd, J = 7.5 and 1.8 Hz, 1H, H4); 6.84 (dd, J = 8.4 and 1.2 Hz,1H, H7); 6.77 (td, J = 7.5 and 1.2 Hz, 1H, H5); 3.42 (s, 1H, H2);3.40 (m, 2H, 2H1); 2.59-2.53 (m, 2H, 2H1); 2.28 (s, 6H, 6H9) ppm.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,110-70-3,N1,N2-Dimethylethane-1,2-diamine,its application will become more common.

Reference£º
Article; Fondo, Matilde; Doejo, Jesus; Garcia-Deibe, Ana M.; Sanmartin, Jesus; Gonzalez-Bello, Concepcion; Vicente, Ramon; Polyhedron; vol. 100; (2015); p. 49 – 58;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

Name is N1,N2-Dimethylethane-1,2-diamine, as a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, and cas is 110-70-3, its synthesis route is as follows.

To a solution of N,N’-dimethylethylenediamine (300 mg) in DMF (2.0 mL) was added K2CO3 (1.0 g) and compound B (466 mg). The mixture was heated at 80C for 3h. Solvent was evaporated and the residue was extracted with DCM and then purified by a prep-TLC plate (10%MeOH/DCM with 1% NH3 in methanol) to give product as a yellow solid (400 mg, yield 75%).

110-70-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,110-70-3 ,N1,N2-Dimethylethane-1,2-diamine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; ARIAD PHARMACEUTICALS, INC.; ZHU, Xiaotian; WANG, Yihan; SHAKESPEARE, William, C.; HUANG, Wei-Sheng; DALGARNO, David, C.; WO2013/169401; (2013); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis