Category: chiral-nitrogen-ligands

110-70-3, The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.110-70-3, name is N1,N2-Dimethylethane-1,2-diamine. A new synthetic method of this compound is introduced below.

Synthesis of [N,N?-Dimethyl-N,N?-bis-(pyridine-2-ylmethyl)-1,2-diaminoethane] was taken from a previously reported procedure [16]. 2-(chloromethyl)pyridine hydrochloride (1.501 g, 9.15 mmol) dissolved in 5 mL deionized (DI) water was added dropwise to an aqueous solution containing K2CO3 (2.556 g, 18.49 mmol) dissolved in 7.5 mL DI water. The resulting mixture was stirred for 30 min. The mixture was extracted with CH2Cl2 (3¡Á10 mL). The organic phase was collected and dried with anhydrous Na2SO4. The dried solution was concentrated in vacuo to afford orange oil. A solution containing N,N?-dimethylethylenediamine (0.471 mL, 4.38 mmol) in 15 mL CH2Cl2 was added dropwise to the aforementioned orange oil dissolved in 5 mL CH2Cl2. An aqueous solution containing NaOH (0.311 g, 7.78 mmol) dissolved in 7.6 mL DI water was slowly added to organic mixture and stirred at room temperature. After 60 h, a second portion of NaOH solution(0.318 g, 7.95 mmol) was quickly added to the mixture. The combined mixture was extracted with CH2Cl2 (3¡Á20 mL) and dried with anhydrous Na2SO4. The organic solution was concentrated in vacuo to afford a brown oil, BPMEN (Yield: 0.631 g, 2.33 mmol, 70%) 1H NMR(500 MHz, CD2Cl2) delta 8.46 (dt, 2H, pyridine ring), 7.80 (m, 2H, pyridinering), 7.51 (m, 2H, pyridine ring), 7.30 (m, 2H, pyridine ring), 3.70 (m,4H, -CH2), 2.66 (m, 4H, -CH2), 2.27 (s, 6H, -CH3). ESI-MS (MeOH).Observed m/z 271.25 [BPMEN+H+] (z=1); simulated m/z 271.19.

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about N1,N2-Dimethylethane-1,2-diamine, CAS: 110-70-3

Reference£º
Article; Pella, Bruce J.; Niklas, Jens; Poluektov, Oleg G.; Mukherjee, Anusree; Inorganica Chimica Acta; vol. 483; (2018); p. 71 – 78;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.31886-58-5, name is (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine. Here is a downstream synthesis route of the compound 31886-58-5, 31886-58-5

For a preparation of Ugi amine 7 refer to Marquarding, D. et al., J. Am. Chem. Soc. 1970, 92, 5389.In a 200 ml schlenk tube, Ugi amine 7 (4 g, 15 mmol) was dissolved in Et2O (50 ml) at room temperature, n-BuLi (12 ml, 30 mmol) was added to the mixture at that temperature and stirred overnight under an inert atmosphere. The reaction mixture was cooled to -78C and Iodine (9.52 g, 37.5 mmol) dissolved in THF (60 ml) was added over the course of 10 min. The reaction was stirred at -78C for 90 min before allowing to warm to room temperature, at which point it was allowed to stirred for an additional 90 min before quenching at 0C with sodium thiosulfate(aq)(50 ml, 25% w/v). Dilute with Et2O (30 ml), the layers were separated and the aqueous layer was further extracted with ether (50 ml x 3). The combined organic fractions were dried over MgSO4solvent remove in vacuo and purified via flash column chromatography (5% MeOH, 5% TEA in DCM) to yield product (3.18 g, 55%).1H NMR (400 MHz, CDCl3) delta 4.46 (dd, J = 2.4, 1.4 Hz, 1 H), 4.24 (t, J = 2.6 Hz, 1 H), 4.15 (dd, J = 2.7, 1.3 Hz, 1 H), 4.12 (s, 5H), 3.62 (q, J = 6.8 Hz, 1 H), 2.15 (s, 6H), 1.50 (d, J = 6.8 Hz, 3H).13C NMR (101 MHz, CDCl3) delta 90.21 (ipso Cp), 74.32 (Fc), 71.67 (Fc), 68.19 (Fc), 65.59 (Fc), 57.59 (CH*), 45.49 (ipso Cp), 41.22 (CH3), 16.01 (CH3). MS (ES) (m/z) calcd for d4H18N56Fel 382.9833, found 382.9820. IR (cm-1): 3078 (=C-H), 2931 (CH2), 2878 (CH2), 2809 (CH2), 1446 (CH3), 1371 (CH3), 1243, 1087, 821 (CH=CH), 732 (CH Ar). Mp: melt at 58C-60C. aD(c = 0.0022 g/ml, DCM) = +7.3.

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, CAS: 31886-58-5

Reference£º
Patent; THE UNIVERSITY OF BIRMINGHAM; TSELEPIS, Chris; TUCKER, James; NGUYEN, Huy Van; HODGES, Nikolas John; MEHELLOU, Youcef; WO2015/92432; (2015); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

110-70-3, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.110-70-3, name is N1,N2-Dimethylethane-1,2-diamine, below Introduce a new synthetic route.

To a stirred solution of N,N’-dimethylethylenediamine (25.0 g, 0.28 mol) in 150 mL of dry diethyl ether was added diethyl oxalate (38.5 mL, 0.28 mol) in one portion. After a few minutes white crystals started to precipitate. The reaction mixture was stirred at room temperature overnight. The product was filtered and washed with dry diethyl ether. The product was dried under vacuum at 47 C overnight to give colorless crystals (38.64 g, 96%). ?H NMR (200 MHz, CDCl3, delta) : 3.50 (s, 4H), 2.99 (s, 6H). ?3C {?H} (200 MHz, CDCI3, delta): 157.35, 45.91, 34.74.

110-70-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,110-70-3 ,N1,N2-Dimethylethane-1,2-diamine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; GEORGIA TECH RESEARCH CORPORATION; WO2005/123754; (2005); A2;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

31886-58-5, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.31886-58-5, name is (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, below Introduce a new synthetic route.

a) Preparation of the chlorophosphine (X3)3.85 ml (5 mmol) of S-BuLi (1.3 M in cyclohexane) are added dropwise to a solution of 1.29 g (5 mmol) of (R)-1-dimethylamino-1-ferrocenylethane in 5 ml of TBME at <-20C. After stirring the mixture at the same temperature for 10 minutes, the temperature is allowed to rise to room temperature and the mixture is stirred for another 1.5 hours. The reaction mixture is then cooled to -78C and 0.62 ml (5 mmol) of dichloroisopropylphosphine is added dropwise at such a rate that the temperature does not exceed -60C. Further stirring at -78C for 30 minutes and subsequently at room temperature for one hour gives a suspension comprising the chlorophosphine X3; Example B17: Preparation of the compound (Rc,SFc,SP)-1-[2-(1-dimethylaminoethyl)ferrocen- i-yllcyclohexylphosphino-i '-bis-beta.S-d^trifluoromethylJphenyllphosphinoferrocene (B17):4 ml (10 mmol) of n-BuLi (2.5 M in hexane) are added dropwise to a solution of 3.44 g (10 mmol) of 1 ,1 '-dibromoferrocene in 10 ml of tetrahydrofuran (THF) at a temperature of < -30C. The mixture is stirred at this temperature for a further 1.5 hours to give a suspension of 1-bromo-1 '-lithioferrocene X5.In a second reaction vessel, 7.7 ml (10 mmol) of S-BuLi (1.3 M in cyclohexane) are added dropwise to a solution of 2.57 g (10 mmol) of (R)-1-dimethylamino-1-ferrocenylethane in 15 ml of TBME at <-10C. After stirring the mixture at the same temperature for 10 minutes, the temperature is allowed to rise to 0 and the mixture is stirred for another 1.5 hours. The reaction mixture is then cooled to -78C and 1.51 ml (10 mmol) of dichlorocyclohexyl- phosphine are added. Further stirring at -78C for 30 minutes and, after removal of cooling, at room temperature for another one hour gives a suspension of the chlorophosphine X4 which is subsequently added at a temperature of <-10C to the suspension of 1-bromo-1 '-lithio- ferrocene X5. The cooling is then removed and the mixture is stirred at room temperature for a further 1.5 hours. After renewed cooling to <-50C, 4 ml (10 mmol) of n-BuLi (2.5 M in hexane) are added dropwise. After the addition, the temperature is allowed to rise to 0C and the mixture is stirred for a further 30 minutes. It is then cooled to -20C and 4.63 g (10 mmol) of bis[3,5-di(trifluoromethyl)phenyl]chlorophosphine are added. The cooling is subsequently removed and the mixture is stirred at room temperature for another 1.5 hours. The reaction mixture is admixed with 1 N NaOH and extracted. The organic phase is dried over sodium sulphate and the solvent is distilled off under reduced pressure on a rotary evaporator. The residue is subsequently heated at 150C for one hour. Chromatographic purification (silica gel 60; eluent = hexane/ethyl acetate 8:1 ) gives the compound B17 as a yellow solid (yield: 66%). 1H NMR (300 MHz, C6D6): delta 1.25 (d, 3H, J = 6.7 Hz), 1.00-2.29 (m, 1 1 H), 2.20 (s, 6H), 3.78 (m, 1 H), 4.02 (m, 1 H), 4.04 (s, 5H), 4.09 (m, 1 H), 4.14 (m, 1 H), 4.17 (m, 1 H), 4.21 (m, 1 H), 4.40 (m, 2H), 4.60 (m, 1 H), 7.80 (d, 2H, J = 6.8 Hz), 8.00 (d, 4H, J = 6.0 Hz). 31P NMR (121.5 MHz, C6D6): delta -27.1 (s); -14.1 (s).

31886-58-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,31886-58-5 ,(R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; SOLVIAS AG; WO2007/116081; (2007); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

Name is Tris[2-(dimethylamino)ethyl]amine, as a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, and cas is 33527-91-2, its synthesis route is as follows.

Cu(CH3COO)2H2O (52 mg, 0,26 mmol) was dissolved in the smallest possible amount of acetone and treated with an excess of Me6TREN. The mixture was left under vigorous stirring for a couple of hours. During this time, the solution turned from blue to green. After evaporation of the solvents, the green product was redisolved in acetone and an excess of KPF6 (dissolved in acetoneas well) was added. The white solid CH3COOK formed on the bottom of the flask and it was filtered off. The light blue solution was dried under vacuum and the solid dissolved in dichloromethanein order to eliminate the excess of KPF6. After filtration of the solid residue, the solution was reduced in volume and the pure product 4 precipitated upon addition of diethylether. Crystals suitable for XRD were grown at low temperature by slow diffusion of diethyl ether into a dichloromethane solution of 4. Yield: 27%; Anal. Calc. for [Cu(L1)(CH3COO)](PF6)2H2O: C, 31.46; H, 6.93; N, 10.49. Found: C, 30.89; H,6.89; N, 10.39%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Tris[2-(dimethylamino)ethyl]amine reaction routes.

Reference£º
Article; Tordin, Elisa; List, Manuela; Monkowius, Uwe; Schindler, Siegfried; Knoer, Guenther; Inorganica Chimica Acta; vol. 402; (2013); p. 90 – 96;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

Name is (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, as a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, and cas is 31886-58-5, its synthesis route is as follows.

General procedure: To a solution of (R)-Ugi?s amine 3 (2.57 g, 10 mmol) in TBME (20 mL) was added 1.6 M t-BuLi solution in n-hexane (6.8 mL, 10.88 mmol) at 0 C. After the addition was complete, the mixture was warmed to room temperature, and stirred for 1.5 h at room temperature. The mixture was then cooled to 0 C again, and Ar2PCl (11 mmol) was added in one portion. After stirring for 20 min at 0 C, the mixture was warmed to room temperature, and stirred for 1.5 h at room temperature. The mixture was then quenched by the addition of saturated NaHCO3 solution (20 mL). The organic layer was separated and dried over MgSO4, and the solvent was removed under reduced pressure, after which the filtrate was concentrated. The residue was purified by chromatography to afford 4a, 4e, and 4f.

The chemical industry reduces the impact on the environment during synthesis,31886-58-5,(R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Nie, Huifang; Zhou, Gang; Wang, Quanjun; Chen, Weiping; Zhang, Shengyong; Tetrahedron Asymmetry; vol. 24; 24; (2013); p. 1567 – 1571;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is N1,N2-Dimethylethane-1,2-diamine, and cas is 110-70-3, its synthesis route is as follows.

To a stirred solution of N,N’-dimethylethylenediamine (25.0 g, 0.28 mol) in 150 mL of dry diethyl ether was added diethyl oxalate (38.5 mL, 0.28 mol) in one portion. After a few minutes white crystals started to precipitate. The reaction mixture was stirred at room temperature overnight. The product was filtered and washed with dry diethyl ether. The product was dried under vacuum at 47 C overnight to give colorless crystals (38.64 g, 96%). ?H NMR (200 MHz, CDCl3, delta) : 3.50 (s, 4H), 2.99 (s, 6H). ?3C {?H} (200 MHz, CDCI3, delta): 157.35, 45.91, 34.74.

110-70-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,110-70-3 ,N1,N2-Dimethylethane-1,2-diamine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; GEORGIA TECH RESEARCH CORPORATION; WO2005/123754; (2005); A2;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is Tris[2-(dimethylamino)ethyl]amine, and cas is 33527-91-2, its synthesis route is as follows.

Embodiment 5Production of [Cu(Me6tren)]BPh4 0.20 g (0.87 mmol) Me6tren (1) was dissolved in approx. 2 ml acetone and a solution of 0.30 g (0.81 mmol) [Cu(CH3CN)4]PF6 (tetrakis(acetonitrile)copper(I)-hexafluorophosphate) in approx. 4 ml acetone was added slowly under constant stirring. A solution of 0.28 g (0.82 mmol) NaBPh4 (sodium tetraphenylborate) in approx. 2 mL acetone was added subsequently to the colorless, complex solution thus obtained, for the replacement of anions. For the preparation of the solid, the complex solution was added to 20 ml diethylether. The voluminous solid of [Cu(Me6tren)]BPh4 (10) obtained was dried in vacuum. 0.48 g (96.6%) of a colorless powder was obtained as the product.All work was carried out in an argon box. It is possible, however, to carry out all work with the Schlenk technique under argon or nitrogen as well.The complex [Cu(Me6tren)]BPh4 is shown in FIG. 1.The results of the crystal structure analysis of [Cu(Me6tren)]BPh4 are shown in FIG. 2.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,33527-91-2,Tris[2-(dimethylamino)ethyl]amine,its application will become more common.

Reference£º
Patent; Schindler, Siegfried; Wuertele, Christian; US2012/16127; (2012); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Tris[2-(dimethylamino)ethyl]amine, cas is 33527-91-2,the chiral-nitrogen-ligands compound. Here is a downstream synthesis route of the compound., 33527-91-2

Mixturing of Co(CH3COO)24H2O (57 mg, 0,23 mmol) and Me6TREN (in excess) was followed by sonication until all the pink cobalt salt was transformed into a bright green oil. The excess of ligand was washed away with diethyl ether.

33527-91-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,33527-91-2 ,Tris[2-(dimethylamino)ethyl]amine, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Tordin, Elisa; List, Manuela; Monkowius, Uwe; Schindler, Siegfried; Knoer, Guenther; Inorganica Chimica Acta; vol. 402; (2013); p. 90 – 96;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

33527-91-2, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.33527-91-2, name is Tris[2-(dimethylamino)ethyl]amine, below Introduce a new synthetic route.

General procedure: The copper complex Cu5-1 was dissolved in water, and an excessive amount of an aqueous solution of saturated sodium tetrafluoroborate (manufactured by Wako Pure Chemical Industries, Ltd.) was added while stirring. A precipitated solid was collected by filtering and a copper complex Cu5-72 was obtained.

33527-91-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,33527-91-2 ,Tris[2-(dimethylamino)ethyl]amine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; FUJIFILM Corporation; Sasaki, Kouitsu; Kawashima, Takashi; Hitomi, Seiichi; Shiraishi, Yasuharu; US10215898; (2019); B2;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis