Month: September 2020

Name is Tris[2-(dimethylamino)ethyl]amine, as a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, and cas is 33527-91-2, its synthesis route is as follows.,33527-91-2

2.1 Preparation of [Co(Me6tren)Cl](ClO4) Analytical grade (Sigma-Aldrich) chemicals were used without further purification. The complex [Co(Me6tren)Cl](ClO4) has been prepared by the published recipe [32] : CoCl2¡¤6H2O (0.200 g, 0.84 mmol) was dissolved in EtOH (20 cm3) at 55 C. Me6tren (0.214 g, 0.92 mmol) dissolved in EtOH (10 cm3) was added dropwise with stirring, forming a blue solution that was stirred overnight at room temperature. NaClO4¡¤4H2O (0.118 g, 0.84 mmol) was added with stirring inducting precipitation of pale blue [Co(Me6tren)Cl](ClO4) (0.237 g, 67%) which was separated by filtration and dried on air. Anal. Calc. for C12H30CoN4O4Cl2: C, 34.11; H, 7.16; N, 13.27. Found: C, 34.36; H, 7.21; N, 13.28%.

With the complex challenges of chemical substances, we look forward to future research findings about Tris[2-(dimethylamino)ethyl]amine

Reference£º
Article; Packova, Alena; Miklovi?, Jozef; Bo?a, Roman; Polyhedron; vol. 102; (2015); p. 88 – 93;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

Name is N1,N2-Dimethylethane-1,2-diamine, as a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, and cas is 110-70-3, its synthesis route is as follows.,110-70-3

The ligand L1 was synthesized via previously reported procedure[23]. A solution of potassium carbonate (2.55 g, 18.45 mmol)in 10 mL water was dropwise added to the aqueous solution of 2-(chloromethyl)-pyridine hydrochloride (1.5 g, 9.15 mmol in10 mL). After about 30 min. of stirring at room temperature, thereaction mixture was extracted with dichloromethane(3 20 mL). The combined organic extracts were dried over anhydroussodium sulfate. The solution was filtered and the solvent wasremoved under vacuum. The resulted residue was then dissolvedin dichloromethane (10 mL). The dichloromethane solution of 2-chloromethyl-pyridine was added dropwise to a solution of N,N0-dimethylethylenediamine (0.471 mL, 5.34 mmol) in dichloromethane(15 mL). After this addition, 10 mL of aqueous sodiumhydroxide (1 M) was added slowly and the reaction mixture wasstirred for next 60 h at room temperature. After stirring was finished,another fraction of sodium hydroxide (10 mL, 1 M) wasadded rapidly. The reaction mixture was extracted with dichloromethane(3 25 mL) and combined organic portion was dried overanhydrous sodium sulfate. Evaporation of solvent led to isolationof the ligand L1 as a dark orange oil. (1.13 g, Yield 79%) 1H NMR(500 MHz, Methanol-d4) d 7.27 (m, 2H, pyridine ring), 7.50 (d,2H, pyridine ring), 7.76 (m, 2H, pyridine ring), 8.45 (d, 2H, pyridinering), 3.68 (s, 4H, -N-CH2-Py), 2.63 (s, 4H, -CH2-CH2-), 2.26 (s, 6H,N-CH3). IR (cm1): 2945, 2789, 1589, 1569, 1472, 1432, 1360,1304, 1146, 1090, 1031, 994, 635, 614, 418.

With the complex challenges of chemical substances, we look forward to future research findings about N1,N2-Dimethylethane-1,2-diamine

Reference£º
Article; Singh, Nirupama; Niklas, Jens; Poluektov, Oleg; Van Heuvelen, Katherine M.; Mukherjee, Anusree; Inorganica Chimica Acta; vol. 455; (2017); p. 221 – 230;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is Tris[2-(dimethylamino)ethyl]amine, and cas is 33527-91-2, its synthesis route is as follows.,33527-91-2

General procedure: The copper complex Cu5-1 was dissolved in water, and an excessive amount of an aqueous solution of saturated sodium tetrafluoroborate (manufactured by Wako Pure Chemical Industries, Ltd.) was added while stirring. A precipitated solid was collected by filtering and a copper complex Cu5-72 was obtained.

With the complex challenges of chemical substances, we look forward to future research findings about 33527-91-2,belong chiral-nitrogen-ligands compound

Reference£º
Patent; FUJIFILM Corporation; Sasaki, Kouitsu; Kawashima, Takashi; Hitomi, Seiichi; Shiraishi, Yasuharu; US10215898; (2019); B2;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is N1,N2-Dimethylethane-1,2-diamine, and cas is 110-70-3, its synthesis route is as follows.,110-70-3

Step. A: N-Methyl-N’-methyl-N’-t-butoxycarbonylethylenediamine A solution of 1 gram (4.58 mmole) of di-t-butyl-dicarbonate in 8 mL of CH2 Cl2 at 0 C. was treated with 0.98 mL (9.16 mmole) of N-methyl-N’-methylethylenediamine. After 20 min the cooling bath was removed and the mixture allowed to warm to 22 C. After 4 hours the mixture was concentrated in vacuo. The residue was purified by flash chromatography on 68 g silica gel eluding with 1 liter of 100:9:0.3 CH2 Cl2:MeOH: ammonia water, then 500 mL of 100:11:0.3 CH2 Cl2:MeOH: ammonia water to give 190 mg (22%) of a volatile oil.

With the complex challenges of chemical substances, we look forward to future research findings about 110-70-3,belong chiral-nitrogen-ligands compound

Reference£º
Patent; Merck & Co., Inc.; US5344830; (1994); A;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is Tris[2-(dimethylamino)ethyl]amine, and cas is 33527-91-2, its synthesis route is as follows.,33527-91-2

To a solution of tris(2-dimethylaminoethyl)amine (0.401 g, 1.74 mmol) in acetonitrile (4 mL) was added 1-bromododecane (1.34 g, 5.38 mmol). The resulting mixture was heated at reflux with stirring for 22 hours, during which time awhite solid was observed. After cooling, and the addition of a cold hexanes/acetone mixture (15 mL, 1:1), to the reaction flask, the precipitate was filtered with a Buchner funnel, and rinsed with a cold hexanes/acetone mixture (20 mL, 1:1), resulting in T-12,12,12 (1.39 g, 82%) as a white powder; mp=225-254 C; ?H NMR (300 JVII-Tz, CDC13) oe 4.11-4.03 (m, 6H), 3.63-3.55 (m, 6H), 3.39-3.32 (m, 6H), 3.30(s, 18H), 1.72-1.62 (m, 6H), 1.37-1.14 (m, 54H), 0.84-0.78 (m, 9H); ?3C NMR (75 MHz, CD3OD) 3 65.3, 61.0, 50.1, 46.8, 31.7, 29.4, 29.3, 29.3, 29.1, 29.0, 26.1, 22.4, 22.4, 13.1; high resolution mass spectrum (ESI) m/z 245.9435 ([Mj3 calculated for [C48H,o5N4j3: 245.9441). See also Yoshimura et al., 2012, Langmuir 28:9322-933 1. ?H and ?3C NMR spectra of compound T-12,12,12 can be found in Figure 52.

With the complex challenges of chemical substances, we look forward to future research findings about 33527-91-2,belong chiral-nitrogen-ligands compound

Reference£º
Patent; TEMPLE UNIVERSITY-OF THE COMMONWEALTH SYSTEM OF HIGHER EDUCATION; VILLANOVA UNIVERSITY; WUEST, William, M.; MINBIOLE, Kevin, P.C.; BARBAY, Deanna, L.; (227 pag.)WO2016/172436; (2016); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is 3,4-Di(1H-indol-3-yl)-1H-pyrrole-2,5-dione, and cas is 119139-23-0, its synthesis route is as follows.,119139-23-0

Example 1 12,13-(2,3-dihydroxy-butan-1,4-yl)-6,7,12,13-tetrahydro-5-oxo-5H-indolo[2,3-a]pyrrolo[3,4-c]carbazole (Compound 14) Palladium dichloride (7.4 g, 41.6 mmoles) was added to a solution of acryrubin A Compound 1a (2.9 g, 8.86 mmol) (prepared as described in Faul M M, Winneroski L L and Krumrich C A, Journal of Organic Chemistry, 1998, 63, 6053-6058) in DMF (100 mL) at 90 C. The reaction temperature was kept at 90 C. for 1 hr. The mixture was cooled and conc. HCl (50 mL), then water (50 mL) was added. The mixture was poured over ice and the resulting precipitate was filtered off. The solids were washed with H2O and MeOH, then dissolved in THF (200 mL) and acetone (200 mL) and the remaining solids were filtered off. The solution was filtered through a plug of silica gel and the solvent was removed under vacuum. The resulting residue was diluted with MeOH, the solids were filtered and washed with MeOH then dried to provide acryflavin A Compound 1b (2 g, 70%) as a brown solid.

With the complex challenges of chemical substances, we look forward to future research findings about 119139-23-0,belong chiral-nitrogen-ligands compound

Reference£º
Patent; Wilson, Lawrence J.; Murray, William V.; Yang, Shyh-Ming; Yang, Cangming; Wang, Bingbing; US2007/249590; (2007); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is (R)-(+)-N,N-Dimethyl-1-ferrocenylethylamine, and cas is 31886-58-5, its synthesis route is as follows.,31886-58-5

To a degassed solution of (R)-1 (829 mg, 3.22 mmol) in THF (4.5 mL) at -78 C was added dropwise sec-BuLi (1.4 M in cyclohexane, 2.5 mL, 3.55 mmol). The resulting deep red solution was stirred for 1 h at -78 C and for 2 h at 0 C. A solution of ZnBr2 (1.3 M in THF, 3.2 mL, 4.19 mmol) was added and the reaction mixture was stirred for further 40 min at 0 C. A degassed solution of [Pd2(dba)3] (148 mg, 0.162 mmol) and tri-(2-furyl)phosphine (tfp) (299 mg, 1.29 mmol) in THF (6 mL) was prepared and stirred for 20 min at r.t. to give a dark green clear solution. To this catalyst solution were transferred a degassed solution of (R,SFc)-1-iodo-2-p-tolylsulfinylferrocene, (R,SFc)-2, (900 mg, 2.00 mmol) in THF (15 mL) and the freshly prepared ferrocenyl-zinc compound. The resulting red-brown solution was heated to reflux under argon at 75 C for 19 h. The reaction mixture was cooled to r.t., quenched with 5 M NaOH (6 mL), diluted with water and extracted with ethyl acetate (3 ¡Á 70 mL). The combined organic phases were washed with water (3 ¡Á 50 mL) and brine (2 ¡Á 50 mL) and dried over MgSO4. The mixture was filtered and the solvent was evaporated. The crude product was purified by column chromatography (silica, PE/EE/NEt3 = 10/10/1 ? 1/2/1). After a second chromatography (aluminium oxide, PE/EE/NEt3 = 1/1/1 ? 1/2/1) was the pure product obtained as an orange solid (yield: 55 mg, 5%). Single crystals suitable for X-ray structure determination were obtained from a solution of the product in EtOAc/PE by slow evaporation of the solvents. M.p.: 158-163 C. 1H NMR (600.1 MHz, CDCl3): delta 1.51 (d, J = 6.9 Hz, 3H, CH3CH), 1.72 (s, 6H, N(CH3)2), 2.42 (s, 3H, Ph-CH3), 3.59 (q, J = 6.9 Hz, 1H, CH3CH), 4.09 (m, 1H, H3?), 4.24 (s, 6H, Cp? + H3), 4.27 (s, 5H, Cp?), 4.39 (dd, J1 = J2 = 2.5 Hz, 1H, H4), 4.42 (dd, J1 = J2 = 2.5 Hz, 1H, H4?), 4.70 (m, 1H, H5?), 4.76 (m, 1H, H5), 7.31 (d, J = 8.0 Hz, 2H, Ph-meta), 7.67 (d, J = 8.0 Hz, 2H, Ph-ortho). 13C{1H} NMR (150.9 MHz, CDCl3): delta 18.9 (bs, CH3CH), 21.5 (Ph-CH3), 40.9 (2C, N(CH3)2), 55.5 (CH3CH), 66.9 (C4), 67.8 (2C, C3 + C3?), 68.8 (C4?), 69.8 (5C, Cp?), 70.7 (5C, Cp?), 71.8 (C5), 73.9 (C5?), 82.0 (C1), 88.6 (C1?/C2?), 89.5 (C2), 93.9 (C1?/C2?), 125.7 (2C, Ph-ortho), 129.4 (2C, Ph-meta), 141.0 (Ph-ipso), 141.4 (Ph para). HR-MS (ESI, MeOH/MeCN): m/z [M + H]+ calcd. 580.1060 for C31H34Fe2NOS; found: 580.1047. [alpha]lambda20 (nm): -739 (589), -843 (578), -1380 (546) (c 0.225, CHCl3).

With the complex challenges of chemical substances, we look forward to future research findings about 31886-58-5,belong chiral-nitrogen-ligands compound

Reference£º
Article; Gross, Manuela A.; Mereiter, Kurt; Wang, Yaping; Weissensteiner, Walter; Journal of Organometallic Chemistry; vol. 716; (2012); p. 32 – 38;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

As a common heterocyclic compound, it belongs to chiral-nitrogen-ligands compound, name is Tris[2-(dimethylamino)ethyl]amine, and cas is 33527-91-2, its synthesis route is as follows.,33527-91-2

To a solution of tris(2-dimethylaminoethyl)amine (0.486 g, 2.11 mmol) in acetonitrile (4 mL) was added 1-bromoundecane (1.55 g, 6.57 mmol). The resulting mixture was heated at reflux with stirring for 19 hours. After cooling, and the addition of hexanes (5 mL), a white solid precipitated, which was filtered with aBuchner funnel, transferring with a cold hexanes/acetone mixture (15 mL, 1:1). The solid was rinsed with a cold hexanes/acetone mixture (2O mL, 1:1), resulting in T11,11,11 (1.62 g, 82%) as a white powder; mp=224-253 C; ?H NMR (300 MHz, CDC13) oe 4. 12-4.03 (m, 6H), 3.65-3.56 (m, 6H), 3.45-3.37 (m, 6H), 3.34 (s, 18H), 1.79-1.66 (m, 6H), 1.41-1.18 (m, 48H), 0.89-0.82 (m, 9H); ?3C NMR (75 MHz,CD3OD) oe 65.4, 61.1, 50.1, 46.9, 31.6, 29.3, 29.3, 29.2, 29.0, 28.9, 26.1, 22.4, 22.3,13.0; high resolution mass spectmm (ESI) m/z 231.9281 ([Mj3 calculated for [C45H99N4j3: 231.9284). ?H and ?3C NMR spectra of compound T-11,11,11 can be found in Figure 51.

With the complex challenges of chemical substances, we look forward to future research findings about 33527-91-2,belong chiral-nitrogen-ligands compound

Reference£º
Patent; TEMPLE UNIVERSITY-OF THE COMMONWEALTH SYSTEM OF HIGHER EDUCATION; VILLANOVA UNIVERSITY; WUEST, William, M.; MINBIOLE, Kevin, P.C.; BARBAY, Deanna, L.; (227 pag.)WO2016/172436; (2016); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.110-70-3,N1,N2-Dimethylethane-1,2-diamine,as a common compound, the synthetic route is as follows.,110-70-3

A solution of di-tert-butyl dicarbonate (4.95 g, 22.69 mmol) in CH2Cl2 (240 mL) was added dropwise to a stirred solution of N,N?-dimethylethane-1,2-diamine (4 g, 45.38 mmol) in CH2Cl2 (80 mL) over a period of 20h. The resulting mixture was stirred at r.t. for 3h. The mixture was then washed sequentially with sat. Na2CO3 (2 x 100 mL), water (50 mL), and sat. brine (50 mL). The organic solution was dried (MgSO4) and concentrated in vacuo. Purification by FCC, eluting with 0-10% CH3OH in CH2Cl2 gave the title compound (2.177 g, 51%) as a pale yellow oil; 1H NMR: 1.40 (9H, s), 2.28 (3H, s), 2.57 (2H, t), 2.79 (3H, s), 3.20 (2H, t).

110-70-3 N1,N2-Dimethylethane-1,2-diamine 8070, achiral-nitrogen-ligands compound, is more and more widely used in various fields.

Reference£º
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; BUTTERWORTH, Sam; FINLAY, Maurice, Raymond, Verschoyle; WARD, Richard, Andrew; KADAMBAR, Vasantha, Krishna; CHANDRASHEKAR, Reddy, C.; MURUGAN, Andiappan; REDFEARN, Heather, Marie; WO2013/14448; (2013); A1;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis

It is a common heterocyclic compound, the chiral-nitrogen-ligands compound, N1,N2-Dimethylethane-1,2-diamine, cas is 110-70-3 its synthesis route is as follows.,110-70-3

To a stirred solution of N,N’-dimethylethylenediamine (25.0 g, 0.28 mol) in 150 mL of dry diethyl ether was added diethyl oxalate (38.5 mL, 0.28 mol) in one portion. After a few minutes white crystals started to precipitate. The reaction mixture was stirred at room temperature overnight. The product was filtered and washed with dry diethyl ether. The product was dried under vacuum at 47 C overnight to give colorless crystals (38.64 g, 96%). ?H NMR (200 MHz, CDCl3, delta) : 3.50 (s, 4H), 2.99 (s, 6H). ?3C {?H} (200 MHz, CDCI3, delta): 157.35, 45.91, 34.74.

With the complex challenges of chemical substances, we look forward to future research findings about N1,N2-Dimethylethane-1,2-diamine

Reference£º
Patent; GEORGIA TECH RESEARCH CORPORATION; WO2005/123754; (2005); A2;,
Chiral nitrogen ligands in late transition metal-catalysed asymmetric synthesis¡ªI. Addressing the problem of ligand lability in rhodium-catalysed hydrosilations
Nitrogen-Containing Ligands for Asymmetric Homogeneous and Heterogeneous Catalysis